Features


Size: 108mm x 82mm x 28mm (4.25 x 3.23 x 1.1) without optional mounting brackets
Weight: 365 grams (13 oz.) as shown
Voltage: 14V to 48V Supply voltage (50V absolute max, down to 6V with external 12V supply)
Current: 80A continuous each channel (150A peak 5 seconds)
Current Limiting: Adjustable from 10A to 130A (sets the limit for both channels)
Over Temp Limiting: fixed at 200F or 93C each channel independently sensed
Four quadrant operation with regenerative braking
Thermal Control: MOSFETs mounted to 0.5 Aluminum bars bolted to case (see below). No fans required.
Indicator LEDs: Speed and direction of each motor channel and general signal status
Receiver battery eliminator circuit (BEC) standard - may be disabled. Provides up to 100 mA of current at 5V to the RC receiver and other attached electronic circuits
Command Format: R/C pulse standard, TTL serial optional
Calibrate button to match Sidewinder to radio or other R/C signal source
R/C Inputs: Left/Steer, Right/Throttle, Flip (inverts steering response when activated)
Drive Modes selected via jumpers:
Left/Right Mix (default - right input acts as steering and left as throttle)
Mixed Mirror Left (left mixed output command sent to both output channels)
Mixed Mirror Right
Left/Right independent (Tank)
Mirror (both outputs mirror a single input)
Failsafe shuts off motor if R/C signal is lost
Six high-current wires (2 battery, 2 each motor) may be soldered or attached via #8 bolt and ring terminals
Expansion header for planned on-board radio tranceiver and single axis gyro (future). May be used for other special add-ons
FLASH-based microcontroller with upgradeable software via in-circuit programming header. Software may be customized for unique applications. Contact us if you have special needs for your application.

email me for more info or
see http://www.robotpower.com/products/sidewinder_info.html
http://www.robotpower.com/products/sidewinder_info.html
Available to buy on http://www.xbotz.comwww.xbotz.com
£270 delivered

My heavyweight robot, Wheely big cheese uses this controller, and doesnt even break a sweat.

Does your robot use this controller????
Let me know, Id like to put a pic of your robot on my website as a robots who use