You would have to invest in a mixer in order to give you full control on one stick unless you spend a few more bucks on the TX and get one with built in mixing
You would have to invest in a mixer in order to give you full control on one stick unless you spend a few more bucks on the TX and get one with built in mixing
Revised link ........
http://www.robot-electronics.co.uk/htm/md22tech.htmhttp://www.robot-electronics.co.uk/htm/md22tech.htm
Note that the other link for the MD22 is Canadian.
Hey Kevin. You dont necessarily have to have a completely flush wedge to be able to get under other robots. I went for a similar idea to yours on my first bot and made the wedge completely flat against the arena floor. After I had seen the other competitors I realised that the majority of them actually have a fair bit of ground clearance so most wedges could get under them even if they dont graze the floor. And with arena surfaces sometimes being uneven, it might be best not to have a super flat edge.
Regards
Lenny
If you have a flat piece of metal coming out from your wedge so that that can go under your opponents then you will be more effective. What I am clumsily trying to say is the front can be like the front of Bigger Brothers flipper.
You might find this site helpful http://www.robotcombat.com/tips.htmlhttp://www.robotcombat.com/tips.html
I plan to use an electric window actuator from a car as the flipper. How fast would it work with a 12kg robot on top of it?
Slow. It would be a lifter rather than a flipper. If its not gas or spring, I cant see anything being a flipper.
Not even if I over-juice the electric actuator?
A CO2 flipper pops in a fraction of a second. An electric motor system will never manage that. If it did, no one would use CO2 for all the trouble it is.
Crank back a spring with an electric actuator and that is a different matter.
Storm II manages about 30ms for full stroke from down to up, and even thats not true flipper territory.
Ed
http://www.teamstorm.comhttp://www.teamstorm.com
Bookmarks