Register To Comment
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Please need some robot advice?

  1. #11
    team_ireland
    Guest
    Hmmm, try changing/removing the fuse as it could be blown. Alsy try by passing the power switch (temporarily) as the problem could be with the switch.

  2. #12
    Guest
    Okay thanks. I will try bypassing the power switch but I know the fuse isnt blown.

  3. #13
    Guest
    Im still not gettting any movement from my motors. I tried pluggin a servo in one of the other channels in the receiver and it worked. But I get no repondse from inputs 1,2 from the Vantec to the receiver. That means the receiver is properly working, the only thing I can think of is the Vantec inputs (1,2) are not working.

  4. #14
    was the vantec brand new or second hand?

  5. #15
    Guest
    The vantec and all the other components are brand new.

  6. #16

  7. #17
    team_ireland
    Guest
    Take one of the connectors out of channel 1 or 2 and try a servo in those channels to ensure they are working.

  8. #18
    Guest
    I already tried taking the connector out of channel 1 and putting in a servo and it worked. So I can only think that the Vantecs inputs must not be working because the transmitter and receiver definitely are functioning.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •