Register To Comment
Page 3 of 45 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 442

Thread: NSBFL 7

  1. #21
    Ill enter!
    Combat Raptor (featherweight)
    Crash (lightweight)
    Collision Force (middleweight)
    Battle Raptor 3 (heavyweight)
    Drilla Killa 7 (heavyweight)
    MORD (heavyweight)
    Ringwraith (heavyweight)

    COMBAT RAPTOR
    Weight: 12kg
    Shape: Like Mega Hurts (the Navy one not the computer one) but with inner wheels and an arm with a low plate on the end, painted orange with black stripes like the raptors in Jurassic Park, with a Velociraptor head on the back that has a spike coming out of its mouth
    Dimensions: 65 (55 if rear spike not included) x 25 x 3/9 (lowest/highest)
    Speed: 14mph
    Ground Clearance: 0 at front, 1mm at sides, 2mm at back
    Armour: 3mm titanium with 3mm polycarbonate on top
    Wheels: 2, inside robot, stick out the top so the robot can run inverted
    Power: 24V battery and motors
    Weapon: An electric powered flipping arm which runs 3/4 the length of the robot to the front. On the end is a wide plate which runs along the ground to get under robots. The head on the back has a long static spike coming out of its mouth for ramming.
    Srimech: Arm acts as srimech; can run inverted if arm fails; cannot rest on sides due to shape; back is rounded and has decorative head so it cant rest there
    Tactics: Flip skirtless robots, at least try to get under skirted robots because plate is low, ram them with spike if it cant
    Strengths: Good flipper for a featherweight, invertable, manouverable
    Weaknesses: Tricky to control, cannot use flipper when inverted except as srimech

    CRASH
    Weight: 20kg
    Shape: Low invertable box painted gray, with wedge at front
    Dimensions: 40 x 25 x 6
    Speed: 18mph
    Ground Clearance: 0 at front due to wedge, 0 at sides and back due to skirts, 4mm behind skirts
    Armour: 3mm titanium
    Wheels: 4, inside robot
    Power: 36V battery and motors
    Weapon: CO2 powered lifting arm, which runs along the centre of the body and down the wedge
    Srimech: Arm acts as srimech - can run inverted if arm fails. Skirts prevent robot from landing on back or sides.
    Tactics: Lift and carry around/flip unskirted opponents, ram around skirted opponents
    Strengths: Fast, good pushing power for a lightweight
    Weaknesses: May be ineffective against skirted opponents, wheels are vulnerable to axes

    COLLISION FORCE
    Weight: 50kg
    Shape: High dome - poking vertically out of the top is a rod with four horizontal rods positioned in the middle, looking like helicopter blades
    Dimensions: 50 x 50 x 30 (main body), 70 x 70 x 60 (including rod)
    Speed: 15mph
    Ground Clearance: 1mm on both domes
    Armour: Shell is 3mm titanium; srimech rods are 1cm titanium
    Wheels: 4, inside robot
    Power: 24V battery and motors
    Weapon: The robot is a full body spinner with two interchangable domes. The first has four Son Of Whyachi-like spiked hammers on it, designed to damage - it can go through about 3mm of titanium. The second has two diagonal rods, (like the one at the end of the rod on Battlebot middleweight T-Wrex) the ends of which are just off the ground, designed to flip when spinning and perhaps damage the wheels. Both domes spin at 3500rpm.
    Srimech: If flipped when spinning, the robot can sometimes bounce back onto its wheels. If it doesnt, or the robot isnt spinning, the rods on top will keep it from turning over and let it fall back onto its wheels, as they poke out wider than the main body. Because there is some vertical rod poking up past the horizontal ones, it cant rest on top of them if completely flipped over.
    Tactics: Use the damaging dome on skirted opponents; use the flipping dome on unskirted opponents
    Strengths: Powerful weaponry; interchangable domes
    Weaknesses: Poor pushing power if dome is disabled

    BATTLE RAPTOR 3
    Weight: 100kg
    Shape: Low box, painted orange with black stripes like the raptors in Jurassic Park, with a low scoop at the front, with a hammer and a decorative Velociraptor head attached to either side of the scoop (the heads are on the sides of the hammers)
    Dimensions: 95 x 60 x 30
    Speed: 17mph
    Ground Clearance: 0 at front due to scoop, 0 at sides and back due to skirts, 4mm behind skirts
    Turning Circle: 0
    Armour: 5mm titanium; scoop is 3mm titanium
    Wheels: 4, inside robot, poke out the top so the robot can run inverted, use skid steering
    Power: 36V battery and motors
    Weapon: A CO2 powered flipper/axe. The weapon is positioned at the front of the robot, with a 3mm titanium scoop at the end resting on the floor. Two small Beta-style pointed hammers are fixed to the side of the scoop, extending just above it. The weapon fires quickly like an axe, turning 180 degrees to flip anything at the front and axe anything at the back. It then returns to its original position at a slower speed, because it would deform the flipper otherwise.
    Srimech: Weapon acts as srimech. If weapon fails in resting position, robot can run inverted because the hammers on the scoop do not extend to the full height of the robot when it is right side up and therefore do not prop it off the floor. It cannot rest on its sides and rear due to the skirts, which flop down when it is inverted.
    Tactics: Flip skirtless opponents and axe skirted opponents.
    Strengths: Multi purpose weaponry; invertable; fast
    Weaknesses: Cannot use weaponry when inverted except as srimech; wheels vulnerable to axes

    DRILLA KILLA 7
    Weight: 99kg
    Shape: Low invertable box, painted red, with a Tornado-like low wedge at the front, and an upside down one at the back for when the robot is upside down, and skirts at the sides fixed at the centre so they work whichever way up the robot is
    Dimensions: 110 x 40 x 25
    Speed: 17mph
    Ground Clearance: 0 at front due to wedge; 0 at sides due to skirts, 3mm behind skirts, 25cm at most at back due to inverted wedge
    Turning Circle: 2cm
    Armour: 5mm titanium
    Wheels: 6, inside robot
    Power: 36V battery and motors
    Weapon: Each wedge has a hole in the centre - inside each hole is a diamond tipped drill, spinning at 600 rpm, which comes out of the hole using a motor. It can come out to cause damage when an opponent is on the wedge, or can stay out and cause damage when the robot rams opponents.
    Srimech: Invertable; cannot rest on sides due to skirts
    Tactics: To get under unskirted opponents, slam them around and bring out the drills to damage their underbellies; to ram skirted opponents with the drills out and try to cause damage
    Strengths: Good pushing power
    Weaknesses: Drills may not penetrate very thick armour; high ground clearance at back

    M.O.R.D (MASTER OF ROBOT DESTRUCTION)
    Weight: 98kg
    Shape: Its body is a box tilted at an angle because the front wheels are larger than the rear ones - its like Intraverter from Robotica if youve ever seen that, or Backlash with wheels instead of claws holding it up. On the sides are extra plates giving the wheels some side protection. At the front is the flywheel, and in front of the flywheel is the scoop, operated by rods going into the robot.
    Dimensions: 100 x 40 x 15/45 (lowest/highest)
    Speed: 20mph
    Ground Clearance: 0 at front due to scoop, 200mm behind scoop on either side of flywheel, 50mm under flywheel, 1mm-5mm at sides, 0 at back due to skirt, 1mm behind skirt
    Turning Circle: 0
    Armour: Body and wheel guards are 4mm titanium, with holes drilled into body armour to reduce weight
    Wheels: 4, inside robot, stick out the top so the robot can run inverted. The front wheels have no motors - they are turned by cords attached to the back wheels, like a skid steer system. Because the front wheels are larger than the rear ones to tilt the robot up, they have a high ground clearance at the front, so plates are welded onto the robots sides to protect them and lower the ground clearance.
    Power: 36V battery and motors
    Weapon: At the front is a electrically powered titanium scoop which operates through 180 degrees, so it can work when the robot is upside down. Behind the scoop is a 10kg vertical spinning flywheel, spinning at 2000rpm and able to cut into 3mm titanium, which comes into play if the scoop is lifted.
    Srimech: Invertable; screws tapped into sides keep it from resting there
    Tactics: Shove opponents with the scoop, then lift the scoop and attack with the flywheel
    Strengths: Fast and manouverable; powerful flywheel
    Weaknesses: Hard to control; can be flipped from sides

    RINGWRAITH
    Weight: 100kg
    Shape: Invertable cylinder on its side, like Barberous, but weapon shaped like Pussycats blade from Series 4 & 5 (side on - its wider of course), painted black
    Dimensions: 100 x 30 x 30
    Speed: 18mph
    Ground Clearance: 10mm
    Turning Circle: 0
    Armour: 15mm LexiGuard inside and a 30kg Duralumin spinning blade
    Wheels: 2, outside robot
    Power: 36V battery and motors
    Weapon: 30kg Duralumin spinning body. It is powered by a C40-400 at 36V geared 3:1 and can reach a top speed of 900RPM. The entire robot is shaped like Pussycats blade from Series 4 & 5 and is designed to tear into all sorts of armour. The tips of the blades are made from Grade 5 Titanium. Its weapon acts like Corkscrew or Warhog and has a greater power than Matildas flywheel - it can cut into 5mm Titanium.
    Srimech: Invertable
    Tactics: Just keep slamming into opponents with the spinning body and turn into them to try and keep them from hitting me.
    Strengths: Hard to attack, manouverable, powerful weaponry
    Weaknesses: Exposed wheels, tricky to control

  2. #22

  3. #23

  4. #24
    This is the new and improved Team Hell:

    HWs:
    Flaming Hell

    Weight: 100kg
    Dimensions: 90x90x60 cm
    Weapon: a triangular spinning cage with 3 sharpened bot openers on each end, weighing 5kg each, spinning at 4000 RPM, powered by a Lemco on 36v
    Power: 2x Bosch 750 motors at 24v (its been made so that the cage motor gets 36v but the drive only gets 24, as the drive is ok as it is on 24V)
    Shape: circular base with triangular cage atop
    Speed: 15mph
    Drive power: 4bph
    Notes: small electric actuators in the rotor arms in order to self right. They have been shock proofed so that the weapon impact will not bust them, and the cage spins 2mm from the ground. Small bearings for the cage and the far set apart wheels give it increased stability for a FBS
    Turning Circle: 0cm
    Armour: 3mm titanium
    Wheel Type - 4 small wheelbarrow type wheels (no need for great traction)
    Strengths: Power of cage
    Weakness: Unpredictable bounce off from an opponent

    Hell Machine

    Weight: 100kg
    Dimensions: 140x100x60 cm
    Weapons: Lemco motor powered axe (run through gear box) that can deliver an axe blow of 3 tons (according to my calculations) and rear linier actuator operated lifting arm that can flip 600kg
    Srimech: Side arms and rear arm
    Speed: 15mph
    Transmission: a 4 wheeled Tornado set up(36v and same gearing), but with a pair of Mag C40€™s in place of the Bosch motors, and a set of NiMh in place of the heavy Lead Acids the real thing uses.
    Turning Circle: 0m
    Ground clearance: 0 at the scoop and wedge edge, 2mm the rest of the way around
    Wheel Type: Go-kart
    Body Shape: scoop fronted, wedged back
    Armour: 8mm Grade 5 Titanium and 2mm stainless steel
    Colour: Black with flame face on scoop and name in blood writing on side, devil head on rear wedge
    Strengths: Enormous pushing power (About 12hp), EXTREMELY powerful axe, relentless in attacking (until a robot is immobile)
    Weakness: Dislikes spinners, doesnt like weapons that use carbon

    Name: Sheer Hell
    Weight: 100kg
    Dimensions: 150cm x 80cm x 120cm
    Shape: low angled box with disc on the front like 13 black and rear 259 disc, style
    Weapons: A front mounted Horizontal spinning disc and a rear mounted vertical spinning disc, both running at 4500rpm and delivering a blow of 75kj
    Top Speed: 13 mph
    Transmission: 4 Rubbertex coated ali wheels (Rubbertex is a grippy rubber substance used on the K*bot tables) run on a Smidsy type wheel system, and run by a pair of Bosch 750€™s and a bank of Ni-cads to give me more weight for armour
    Armour: 8mm Titanium
    GC: 3mm either side and back, 7mm under the disc at the front, variable at the sides of the disc
    Srimech: powerful electric arms mounted on the top
    Turning Circle: 0cm
    Strengths: devastating weapons
    Weakness: carbon based weapons
    Notes: will NEVER turn the vertical flywheel into an opponent as it will throw SH over. Also, counter-acting discs (vertical and horizontal) will keep it stable, and if it is flipped, it does a funny jig in the air before coming down, most of the time, right way up

    Name: Flipping Hell
    Dimensions: 120cm x 80cm x 40cm
    Weight: 100kg
    Shape: steep wedge front, elongated wedged tail (not used as a weapon)
    Weapon: 1000psi 2 pivot pneumatic flipper that can generate enough momentum and force to throw a 100kg robot 25ft up and 20ft across
    Top speed: 18mph
    Transmission: just like Razer€™s
    GC: 0 at the front, 2mm down the side, 4mm at the back end
    Turning Circle: 0cm
    Armour: 6mm aluminium and steel alloy
    Strengths: Can win with one weapon shot
    Weakness: None
    Notes: 4 wheels, the rear two of which are Razer type, so the flipper is always facing its opponent

    MW:
    Hell Fire

    Weight:50kg
    Dimensions: 120x110x40cm
    Shape: low slung wedge
    Weapons: Powerful pneumatic flipping arm that has a plate that runs the width of the front, that can throw 75kg 3 feet or so no problem, and can, flip 100kg, but not too high, and a rear Pussycat style Saw, that spins at 4000rpm, and has carbon tipped teeth to cope with titanium.
    Top Speed: 25mph
    Transmission: a pair of Mag C40€™s on 24v NiMH€™s running through a really simple transmission, but a reliable one due to features to keep the chain on.
    Amour: 4mm Ali and steel alloy and 2 mm of stainless steel on top
    Strengths: Very manoeuvrable and fast, generally very easy to control
    Weakness: Exposed outer wheels
    Ground Clearance: 0 at the front, 5cm at the back, varying from 0 to 4.5 at the sides (wedge goes up)
    Turning Circle: 0cm (its turning is very nimble)
    Notes: Hell Fire is extremely manoeuvrable because it has 2 sets of wheels on the same axle, meaning that it€™s incredibly stable, and can turn on a penny, and can still run even with outer wheels ripped off

    LW:
    Name: Hell Hound
    Weight: 25kg
    Dimensions (LxWxH): 50x40x30cm
    Shape: scooped front, rectangular body, rounded back
    Weapons: 2 conjoined Pincir type crushing jaws with a small hydraulic ram powering each, producing a 1 and 1/2 tonne crushing force
    Colour: mainly black, but with Rotweiler features all over the body
    Speed: 15MPH
    Transmission: a pair of Bosch 400€™s on 24v running through a simple 6:1 ratio gearbox
    Armour:1mm stainless steel and 1mm Ali/steel alloy (tough enough for LWs)
    Srimech: cable pulled legs from out the side (like a dog cocking his leg to do his business)
    GC: 0 at the scoop, 2mm the rest of the way
    Turning circle: 0cm
    Strengths: Power of weapon
    Weakness: slow self righter (still effective mind)

    FW:
    Name: Hells Angel
    Weight: 12kg
    Dimensions: 50 x 40 x 20 cm
    Shape: Scoop front, rectangle body, wedged rear end
    Weapons: a Magmotor powered axe, drilled for lightness, but with still a heavy axe head, with a wallop power of about 500kg
    Transmission: Ali protected Windscreen wiper motors attached directly to the wheely bin wheels, which are studded with screws pointing out (like those on Chaos 2)
    Speed: 12 MPH
    GC: 2mm all around, 0 at the scoop end
    Srimech: The axe, the weight of which pulls it over so it cannot rest on its side. Make SURE you remember that.
    Armour: 1mm Aliminium, 1mm Ti, and 1 mm Stainless
    Strengths: The axe
    Weakness: the armour may not stand up to strong FW spinners, but should prove good enough

  5. #25
    Archangel of the Abyss

    Colour: silver and dark metallic blue

    Weight: 150kg

    Shape: a two layered full body spinner, both layers being round, the top edge is rounded slightly.

    Mobility: cheeky boy walking system for stability but with feet extra wide with gripped rubber for slightly more traction powered by 4 x C40-500 Magmotors on 36v. 6HP each

    Speed: 8mph

    Turning circle: 0m

    Armour: 7mm titanium alumium alloy, the chassis is made up of triangular sections of aluminium boron carbide, the two outer rings being hardox and the supportive ones being mild aluminium

    Ground clearance: 4mm under skirt (which is attached to base) skirt is 3mm of aluminium, covering up an inch of titanium foam which proofs it against SD IV type weapons more

    Weapons: a two layered full body spinner, the upper layer spins completly at 1000rpm with a practically instantanious spin up time, it has eight blades, two lower and two upper and is mainly for bouncing opponents away, this defends the robot while the much more powerful lower flywheel gets up to a speed (between 1500 and 2500rpm depending on tourny rules) it has two 7.5 kilo blades on the lower flywheel, each being 5cm long, the upper flywheel blades are the smae length but the upper wheel is about 3mm wider so so that the blades will hit something before the lower as if the lower hit it would prevent it reaching speed. The upper ones are designed to knock away opponents while causing impact damage wheras the lower ones are designed to cuase maximum damage. The other use of the pair is that it can hit with the upper to stop another FBS and then the lower can hit it when its not spinning.

    According to an online calculator thing that Aaron showed me the lower flywheel at 1500 rpm gets 89Kj output.

    Srimech: self righting bar like tengus but obviously a bit mroe powerful, powered by linear actuators

    Strengths: Very high damage potential, 360 degree protection: the fbs that stops fbs, the two different flywheels give it a tactical advantage, fast and manouverable for a walker.

    Weaknesses: pushing still not great (althoguh vastly improved)



  6. #26

  7. #27
    Guest
    How does the Cheeky Boy walking system work?

    Isnt it just a clone of the Anarchy style walking system?

  8. #28
    ermmm no, the legs are 6 legs on each side, side by side and work by a swingng motion whereby theres always at leat two feet on the ground one each side at all times, one at the fornt and one at the back making it very stable.

    I would find a link but when i tired putting cheeky boy robot into google one of the results on the first page is me trying to explain it before in referance toheart of skadi, but theres a bit on it on http://www.technogames.netwww.technogames.net under competitors

  9. #29

  10. #30

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •