Register To Comment
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Futaba S3106

  1. #1

  2. Well you can increase the speed of an sd200 servo i think but i cant remember of hand how.

  3. #3

  4. Guest
    Rearrange the geartrain a bit.

  5. #5
    ok Im not sure as to the gearbox arrangement, but I would imagen its the standard gearing.

    Paul you should see 2 gears, one sat on top with one gear that splits the 2(this sits over the motor), you should be able to remove the gear above the motor and join the two gears one on top of each other, I do this by putting a thin bit of metal down the thick bit of plastic on the gear on top and use some glue just to help keep them together

    hope that sheds some light

  6. #6

  7. Guest
    Want it fast, no thats too fast, are some people never pleased?

  8. #8
    What you need is to take out the PCB and replace it with a mini speed controller. I did look into building one that would fit into the servo case but didnt built it because there was not enough interest. I have the basic design somewhere, just needs finished, building and testing.

  9. #9


Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •