Register To Comment
Page 1 of 107 1231151101 ... LastLast
Results 1 to 10 of 1065

Thread: Featherweight Database

  1. #1
    Id like to ask if youd all like to start this
    topic by putting your robots (featherweight) name and details up here...
    Ill start off:
    Robot- Micro-Maul
    Speed- 20mph
    Power- 1x ni-mh 3300mah 14.4v batt-pack
    Drive- 2x 12v drill motors (150watt each)
    Weapon- 4 bar lifter, lifts in 1/2 a second
    Aromour- 6mm-12mm polycarbonate with 2.2mm titanium
    Cheers, Ewan

  2. #2

  3. #3
    Robot - Alpha
    Speed - 15mph
    Power - 24v 3Ah NiCads
    Drive - Gold Motors with Direct Gear reduction
    Weapon - Spikes
    Armour - 4mm SSteel scoop, 6mm poly and 4mm ali on sides
    http://www.blazerbotics.co.ukwww.blazerbotics.co.uk

  4. #4

  5. #5

  6. #6
    Robot - Venom
    Speed - Never Measured
    Power - 24v 3AH NiMH
    Drive - 2x Gold motor with a 10:1 worm reduction
    Weapon - Crusher
    Armour - 3.2mm - 1.5mm Hardened Steel

  7. #7

  8. #8
    kane's Avatar
    Roboteer

    Minimoth
    Speed: 12mph
    Power: 3x 8.4v NiMH (25.2v)
    Drive: 2x PML GPM12s (Modified) 110w
    Traction: 6x Guitel 100x32 Blue Resilex
    Controller: Make Robotics Feather01 (Prototype)
    Weapon: Full Pressure Flipper
    Armour: Titanium/ Polycarbonate
    Frequency: 40.985MHz
    Status: Under Construction

    Kane Aston
    http://www.makerobotics.com/http://www.makerobotics.com/
    Kane Aston
    http://www.makerobotics.com

    Co-owner and builder of BEHEMOTH

  9. #9
    Delta
    Speed - 8mph
    Power - 14.4v 3Ah
    Drive - 35w Bosch Motor
    Controller - Probably Electronize
    Weapon - Flipper (powered by a 330kg force ram)
    Armour - Poly/Ali
    Status - Mock-up chassis in progress
    Should be done for first event nxt Yr.

  10. #10
    stu's Avatar
    Member

    FlowRate
    Speed: 14mph
    Power: 1x 12v 3300mAh NiMH Pack
    Drive: 2x 480watt motors via custom gear box
    Controller: 2 x New Enhanced 30amp Electronize
    Weapon: High flow rate low pressure 16bar Pneumatic Flipper
    Armour: 3mm Titanium / 10mm Polycarbonate
    Frequency: 40.805MHz
    Status: Moving and flipping - but not battle Ready.

    Stu
    http://www.teamkat.co.ukhttp://www.teamkat.co.uk

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •