Smaller or alternatives to N20s

[titchard]

Hi all,

I am in the middle of sketching out a design in fusion, and curious to see if anyone has found any decent alternatives to the N20, or are they considered the best for antweights for size/weight/power ratio?

Thanks in advance!

[Ocracoke]

N20s are the most common by far and are generally reliable and well put together. I know N10s, which are smaller, exist but pass as to wherever or not they would work.

[James Williams]

Hi Richard

The only real alternative to N20's is, as Lucy says, N10's. They've only been on the market for about a year, so haven't really been tested long term, but a few people have started using them to great effect. On the Robotwars101 forum (an antweight specific group) a builder did a write up testing N10's (link below). In general they are smaller & lighter, with a higher top speed but less torque. I'd recommend them for clusterbots & large spinners, where the size & weight difference really matter.

https://www.robotwars101.org/forum/v...2530&start=110

[titchard]

Thanks for the replies! Will do some research. Currently i am not that desperate to shave off the weight, but those are definitely going to famous last words!

Thanks again!