Register To Comment
Results 1 to 3 of 3

Thread: How to power the safety LED?

  1. #1

  2. #2
    Hi Pete

    I use 4s Lipo batteries in all my Feathers and found a 340 Ohm resistor just before the LED on

    the positive side works fine-use a red LED-they are usually rated highest and connect the negative

    to a negative outlet like battery or ESC.

  3. #3
    You will need a resistor, but as 4s is 14.8v you can use a 680 ohm resistor. You can also just use some prewired leds for 12v, they will be fine at £15v - i used them before. https://www.ebay.co.uk/itm/3mm-5mm-D...r=502685164120 - just some i found on ebay. there are plenty of sellers. Also you can use 12v led strips - i have used these on 5s.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •