Register To Comment
Results 1 to 6 of 6

Thread: Argos drill motor mounts and other mounts.

  1. #1
    Roboteernat's Avatar
    Roboteer

    Status
    Offline
    Name
    Nat
    Robots
    Wanna Choppa (Axe FW) Short Circuit (HW RWs6) Locking Wheel Nuts (AW) DELLapidated bANTtery (AW) Lo
    Location
    Eastleigh, Hampshire
    Posts
    313
    Still in manufacture (September 2019) Made to order and usually ship next day.

    A4491DEA-8F5F-44B7-B4EC-F0A4D03F5E22.jpg



    Cost is £7 a set for 1 motor. Postage Starts from £2.50 and depends on weight/quantity ordered.

    I can also change dimensions of mounts should your design require it!

    Height from centre shaft: 30mm

    Distance of mount holes 52.5mm x 30mm. Press the mounts firmly together to check your spacing measurements.

    Mounting bolts: M5 depth 20mm

    I can also design mounts for other motors, and have done for Bosch motors.
    Have something odd? I can discuss postin the motor to me and I can 3D scan the motor assembly to produce bespoke mounts.
    Just get in contact :-)
    Thank you,
    Last edited by Roboteernat; 2nd September 2019 at 10:13.

  2. #2
    Roboteernat's Avatar
    Roboteer

    Status
    Offline
    Name
    Nat
    Robots
    Wanna Choppa (Axe FW) Short Circuit (HW RWs6) Locking Wheel Nuts (AW) DELLapidated bANTtery (AW) Lo
    Location
    Eastleigh, Hampshire
    Posts
    313
    As an update, i have now 2 designs of mounting options with using the zink screw inserts for M5 bolts, and another design for Barrel nut or Cross Dowels for M6 mounting screws, see image.

    I can also adjust the heignt from axle centre to base should your design requirements necessitate it.
    20181005_125606.jpg20181005_125618.jpg

  3. #3
    Roboteernat's Avatar
    Roboteer

    Status
    Offline
    Name
    Nat
    Robots
    Wanna Choppa (Axe FW) Short Circuit (HW RWs6) Locking Wheel Nuts (AW) DELLapidated bANTtery (AW) Lo
    Location
    Eastleigh, Hampshire
    Posts
    313
    A video of the fitting is on YouTube.



    Or google Argos motor mount YouTube.

  4. #4
    LookingToBuild's Avatar
    Roboteer

    Status
    Offline
    Name
    Mike Perryman
    Location
    Wales
    Posts
    3
    I ordered 4 sets of these mounts, from order to delivery, just a few days. Thank you Roboteernat.

    I have to say they do their job really well, and are certainly well designed to keep the new*er* Argos drill/gearbox units together and secure. Bye bye to the bodge of holding the motor to the gearbox via some electrical tape!

    I will be ordering more sets of these in the near future.

  5. #5
    Roboteer

    Status
    Offline
    Name
    Tom Harrington
    Robots
    CATastrophe (FW) CATnip (FW) CATch (AW) CATamaran (AW) CATapult (AW)
    Posts
    1
    I have now bought 3 sets of these incredible motor mounts and I can say they are fantastic, the quality is excellent and they have never let me down in combat. They grip the motor very well and will almost never fall off. To anyone looking for ways to hold their motors in place, this is where to get them.

    Definitely will be getting some more!

    Tom-MCR

  6. #6
    Roboteernat's Avatar
    Roboteer

    Status
    Offline
    Name
    Nat
    Robots
    Wanna Choppa (Axe FW) Short Circuit (HW RWs6) Locking Wheel Nuts (AW) DELLapidated bANTtery (AW) Lo
    Location
    Eastleigh, Hampshire
    Posts
    313
    Just to say i have now got back after getting married, so can now accept orders for motor mounts, wheel hubs and wheels combos.

    I will also like to add that i have a design to suit the Black and Decker motors with the 3 screws around the gearbox. These have the same mounting holes as the argos ones, so would be compatible with argos spacings.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •