I've been looking into using Lipo batteries for Neophyte & have encountered a problem trying to find a suitable fuse.

The battery I'm looking at getting is a Turnigy 5000mAh 5S 30C at 18.5v. As of right now the total stall current for my drive & weapon motors is 129.2A. (2x 18v drill motors @ 62A + actuator @ 5.2A).

From my understanding having read what people have said on here the fuse needs to be slightly higher than the max draw of the machine but below the max burst current of the battery, which I've calculated as 150A. I've tried looking online for 130A fuses but the only ones I can find are either rated at much higher voltages (such as a 130A/80V one I found on Farnell), or ones with very limited information (such as on ASAP electrical).https://www.asap-supplies.com/anl-fuse-714434

If anyone has any ideas where I could get a suitable fuse or if I'm making a mistake somewhere I would appreciate it.