Register To Comment
Page 1 of 20 12311 ... LastLast
Results 1 to 10 of 194

Thread: Haynes Manual Build a Robot

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

  2. #2
    Ocracoke's Avatar
    Team Kaizen

    Hey there, welcome to the forum!

    £80 sounds OK to me though I've not used any metal cutting companies before, who quoted you that?

    I seem to recall the folks behind Neophyte (another robot) following the Haynes guide as well... they might be able to direct you as to what works/what doesn't work.
    Team Kaizen - Build Diary for all the robots

    AW: Amai, Ikari, Lafiel, Osu, Ramu
    BW: Shu!, The Honey Badger
    FW: Azriel
    MW: Jibril, Kaizen

  3. #3

  4. #4

  5. #5

  6. #6

  7. #7
    Got a feeling that was pre event. As I was pitted next to them and the frame looks straight

  8. #8

  9. #9

  10. #10
    Ocracoke's Avatar
    Team Kaizen

    Least Neophyte came out of the arena in one piece (mostly)!

    Also I wouldn't recommend the Sabretooth speed controller they use as they are notoriously unreliable as we found out the hard way. Ours, despite being brand new, failed tech check because it wouldn't stop powering the motors when it lost signal, so we couldn't compete for most of the event.
    I had that as well with my dual 2x5amp Sabretooth on my Beetleweight Shu!. I think I ended up changing one of the DIP switches that resolved it.
    Team Kaizen - Build Diary for all the robots

    AW: Amai, Ikari, Lafiel, Osu, Ramu
    BW: Shu!, The Honey Badger
    FW: Azriel
    MW: Jibril, Kaizen

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •