Posted once or twice before but Ive recently started putting things together for my Ant Weight, after looking at a bag of Components doing nothing for far too long.

So Ive got to this stage of building the circuit

Stage 1 -

https://i.imgur.com/MDQQLJ5.jpg

After plugging in the battery the Green light comes on

Stage 2 -

https://i.imgur.com/V200qBV.jpg

and then I plug the Lemon in and it flashes Red,

https://i.imgur.com/Cq11Vjy.jpg


Then the right motor starts moving, I then bind the controller (Devo 7e) and Ive managed to get it to stop running the motor is I hold down the opposite way on the throttle however this only lasts a short time and then the motor just stops completely after 30 seconds to 1 min. And then no matter what I do on the controller I cant get either motor to move again.

Here is a video of the motor coming on




( I hadn't Bound the transmitter in that video, but its the same once bound ) One motor spinning until I hold the throttle the other way.


I have had a play around with putting JR connectors in different pins of the lemon but none are really giving me much different results.

Just wondering what am I doing wrong? How do I go about solving these issues?

Just wanted to say a massive thanks to Ocracoke as well, for his help to get me to this stage as I wouldn't have been able to get anywhere near it without his assistance! Massive help!

Bad Wolf