Register To Comment
Page 3 of 9 FirstFirst 12345 ... LastLast
Results 21 to 30 of 84

Thread: BOB FW Series

  1. #21

  2. #22

  3. #23

  4. #24
    It's because the total voltage of the pack isn't what it set in the charger.

    14,8V is 4S LiPo.

    You can use the charger in a few charge modiï. Charge and balancing charge. Balancing charge is almost mandatory for us.

    If you program 4S LiPo and 2A, it will charge any battery that has a voltage between 10.8V and 16.8V.

    With balancing, the individual cells are measured, and if 1 gives a too low voltage, the charger won't start either.

  5. #25

  6. #26
    If you call up the individual cells on the display, what information is displayed?

  7. #27

  8. #28
    That is a very strange reading. 2 options.
    Or the cells are DEAD, gone, destroyed, sucked dry.
    Or there is a problem with the balancing wire harness.

    What does the main connector give as voltage?

  9. #29

  10. #30
    No, I mean, meassure the voltage of the main leads.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •