Register To Comment
Page 21 of 21 FirstFirst ... 11192021
Results 201 to 207 of 207

Thread: Project Squirrel

  1. #201
    I start this update after a long *ss time of not managing to update anyone, but I still plan on working on this robot, even as I write this up on my birthday. 27 today, so that's fun haha.

    I've been debating on whether or not to order some plastic that's cut to the basic sizes of the robot itself, so I can just trim and so on and so forth. Or to at least get the stuff like the side panels, baseplate, back panel and middle sections. I've drawn out everything over and over, just to see if everything'd fit, tabs and all, and go from there, marking up the screw markings and motor positions.

    That would work, right?

  2. #202
    Ocracoke's Avatar
    Team Kaizen

    I think so. That's kind of how I've been angling on my Middleweight in that I order the basic size of the sheets I need and then cut it to shape as required. The planning you mention should mean it should all fit but can nothing be reused from the previous attempt?
    Team Kaizen - Build Diary for all the robots

    AW: Amai, Ikari, Lafiel, Osu, Ramu
    BW: Shu!, The Honey Badger
    FW: Azriel
    MW: Jibril, Kaizen

  3. #203
    Well a majority of the plastic I've used like the baseplate, centre pieces and sideplates'll be useless unless I decide to turn them into little wedgelets, but the electrical stuff's fine, just need some rejigging here and there, possibly a little rewiring, but everything electrical is pretty much good.

    If anything, I'd need to figure out how to cut the lights out of the previous attempt and attach them to the new one... maybe I'll just make it as a separate sunken panel and cover it with a clear plastic to protect those lights.

  4. #204
    So, a genuine concern popped up in my head earlier, and I'm just wishing to know... are there any dimensional rules I have to follow? Like, having to be under a certain width/height/length? If so, then I might have to completely rethink my design or just full on shrink it down by half or so.

  5. #205
    There isnt a restriction really with dimensions, just the bigger you make it, then thinner or less weight you have free for armour.

  6. #206
    Ocracoke's Avatar
    Team Kaizen

    As Nat says, there isn't any (unlike the AW class which does) for Feathers, so long as it can fit in the door :P
    Team Kaizen - Build Diary for all the robots

    AW: Amai, Ikari, Lafiel, Osu, Ramu
    BW: Shu!, The Honey Badger
    FW: Azriel
    MW: Jibril, Kaizen

  7. #207
    Yeah, sorry i ha my featherweight head on, yes ants have a 4inch cube rule, BBB have bigger dimensions for some of their bogebot buils - check the bbb web pages for those, but beetle up dont.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •