Register To Comment
Results 1 to 6 of 6

Thread: (BW) Ovorto, first bw/first bot

  1. #1

  2. #2
    Good list so far - would recommend going over to Ranglebox though and looking for the 1000rpm motors there and possibly getting yourself a pair of Botbitz 10as if Ellis has them in stock. 30A is way too much for those motors, will just take up more space/weight when you really don't need it. Also could look at Lemon RXes for receivers, they're quite small too and will help keep things compact and save you some weight.

    If you're looking for materials with which to build the machine out of, I'd recommend looking at some 15mm HDPE or something along those lines and thick alu (6mm or so) or steel (~3mm) for a scoop. Best of luck!

  3. #3

  4. #4

  5. #5
    Welcome to the forum! As Matt said, good list and great start. You're well on the way.

    The motors are back in stock now, unfortunately the 10a ESCs will be a while as the supplier (Botbitz) goes through some changes. Hoping to have some in time for the champs in November, though.

    The ESCs you ordered may not be reversible. Hopefully they're fine, but most solutions outside of this community are unsuitable for our needs. They should be more clear on the listing. Fingers crossed!

  6. #6
    Those ESCs aren't reversible unfortunately. I used one to power the spinning weapon in BitzaWood a couple of years back. Great ESCs, if you want to go one direction....

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •