Register To Comment
Results 1 to 5 of 5

Thread: Removable links

  1. #1

  2. #2
    Normally people just make one out of standard connectors. I prefer to use XT60's and you simply solder both sides of the connector together on the 'link' with a loop of wire. Then you solder it in usually on the positive line coming from the battery (Like you would a switch in an ant).

  3. #3
    Also, make the removable part with the male side of the connector This makes it harder to accidentally switch the bot on with a tool or other conductive part.

  4. #4
    this is why i prefer EC5s. both sides are insulated

  5. #5

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •