Hello, I'm making my first featherweight.
I already searched in the forum some advices, but I made this thread to improve.
I also made some antweight, a flipper and a rammer.
I still don't know what the name is going to be.
IMG_3009.jpgIMG_3010.jpgIMG_3011.jpgIMG_3013.jpgIMG_3014.jpgIMG_3016.jpgIMG_3017.jpg
The motors are 12V coordless drills, the batteries are from the same drills, but soldered in a 2X5 pack.
It uses servos and microswitches, the recever battery has a switch but the motors have 1 removable link for
each.
The body is wood, the top and bottom plate is 1 cm multilayer, the sides are 1.8 cm plywood (I didn't found 2 cm) and the front is 3 mm steel.
It's about 31 cm long, 44 wide and 8 tall, not counting the wheels.
I will add steel parts on the sides to make it roll on it's wheels.
I've got a spektrum dx6i for the TX and an orangeRX 620 for the recever.
That's it for now.
If there are any other italian roboteers, let me know!
Bookmarks