Link to each part, then we can all make sure that you're not going to make any mistakes etc. Don't forget to include postage and customs etc
£150-170 is probably a more accurate figure.
Link to each part, then we can all make sure that you're not going to make any mistakes etc. Don't forget to include postage and customs etc
£150-170 is probably a more accurate figure.
http://www.ebay.co.uk/itm/2-x-12V-DC...item4d02562621
http://www.botbitz.com/index.php?rou...&product_id=56
http://hobbyking.com/hobbyking/store...arehouse_.html
http://www.directplasticsonline.co.u.../Natural/10mm/
http://www.technobotsonline.com/bane...-shore-30.html
have the hubs
ignoring the rx and tx, have i missed anything?
Battery charger? Also if I was you I'd get a high power servo from hobbyking in case you want to add a lifter as the postage will probably be more than the cost of the servo if you order it separately- but that's your choice.
If you don't already have them you need a connector for your battery and a removable link/ switch or something (I'm not sure on the beetleweight rules for this).
Other than that it looks like you've got everything.
ok how many mha should i aim for?
and what thread are the mounting bolts on the front of those motors?
also it doesn't say on the botbitz website if they have a BEC for the Rx?
will these do for the battery and the charger?
http://www.giantshark.co.uk/product/...c-lipo-battery
http://www.giantshark.co.uk/product/...harging-system
thanks in advance!
BEC for the Rx? YES they have
thanks a lot for all the help guys now i need to go and get some cash
What is the best way of mounting those motors? I was thinking a hope mounting hole and some kind of clamp or just making a plate to mount he front of the motor to, will that be strong enough?
Is how I made mine
i just used a bit of 2mm aluminium u channel to mount my 4 motors but you can buy ready made brackets off ebay and amazon
http://www.amazon.co.uk/Pololu-Metal...eywords=Pololu
http://www.ebay.co.uk/itm/2-pcs-Stee...item417753aa06
http://www.ebay.co.uk/itm/25mm-Motor...item33781e0245
Last edited by plargen; 30th December 2013 at 16:36.
I think I'm going to make one out if the 10mm hdpe sheet I have orders, to mount things to the top and bottom, can I thread it or will it be too soft, or are there wallplug type things I can get I can get?
Bookmarks