polycarb :)

[Pugster2002]

what should i use to cut polycarb for myant weight

[razerdave]

Jigsaw or hacksaw for antweight sized bits.

[team_mute]

We use a jigsaw with blades like below for Mutes poly but its 12mm thick so hacksaw would be fine

http://www.screwfix.com/p/multipurpo...ack-of-3/21572

[Pugster2002]

ok how do you stick it togethor

[Pugster2002]

ok how do you stick it togethor

How do you stick the polycarbonate together and what with is what I was trying to say

[razerdave]

I would not try and stick it together, I would screw it together.

[gizz]

For the 1mm poly i used on my ants i either just cut it with a pair of scissors or used a sharp modelling knife and cut a straight line in it with a ruler and then bent it, that way it broke along the line making it straight.
It's easy enough bending polycarb to the shape you want and screw it together

[limpet]

For 1mm I use tin snips, you can also score it deep and then snap it.
It will glue with super glue if its clean.

[Gaseraki]

I have cut up to 2mm poly carb with a sharpe knife and a metal ruler.
Been able to bend up to 2mm polycarb by hand
At about 3mm polycarb I would recommend hacksaw/ jigsaw that kind of thing.

[baker01t]

i used polycarb (1mm) on Captain slow... it just shattered