Search:

Type: Posts; User: Triceratop

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    0
    Views
    242

    2.4g 2 Channel Transmitter

    Hi,

    Trying to find a 2 channel 2.4g transmitter with a fail safe built in. Anyone got an unwanted one kicking about?

    If so, let me know and we'll hopefully come to agreement on cost/s.
    ...
  2. Replies
    2
    Views
    358

    6s Brushed Motor ESC/s Wanted

    Hi,
    I am currently building a 2 wheel independently driven FW. The motors are 20v brushed, looking at using 6s Lipo's for power source. I believe the motors have a max amp stall at around 20 amp...
  3. Hi all, thanks for the advice. Had a look at the...

    Hi all, thanks for the advice. Had a look at the esc's they are blown. With further investigation I have found they where sold as 6s compatible however, they are actually 4s.... they also should have...
  4. Run 2 Motors on 1 Speed Controller (ESC)

    Hi everyone, having a bit of an issue with my new FW robot. I built it to be 4wd, each wheel with it's own motor. I rigged up a speed controller to each side - 1 speed controller running two motors....
  5. Replies
    17
    Views
    4,037

    Hi all, thought I would test the waters again and...

    Hi all, thought I would test the waters again and see if there are people interested in a social meet in Lincolnshire. This would be open to all roboteers and budding ones too.
    Let me know and let's...
  6. Thanks for all the comments and advice, I think I...

    Thanks for all the comments and advice, I think I shall stay with the 9mph and keep the high torque which should help in close combat.
    Regards
  7. Hi guys, thanks for the input, just for...

    Hi guys, thanks for the input, just for clarification I shall be running 18v motors with a 650rpm on the output shaft @ 22.2v so I should see a slight increase of speed, I am guessing approx. 800rpm....
  8. Hi Michael, Thanks for the reply, I intend to...

    Hi Michael,
    Thanks for the reply, I intend to over volt using 6s Lipo battery, so yes should get a little more than the specified rpm out put. The torque on the output shaft is running around 40 n/m...
  9. Featherweight Recommended Speed / Output Shaft RPM

    Hi all,
    Looking at building Featherweight number two as first (Tricerabot Jnr) was a bit of fun / prototype. The problem I have there is an abundance of motors / gearboxes etc, all having different...
  10. Replies
    8
    Views
    2,331

    Thanks again for the confirmation, starting to...

    Thanks again for the confirmation, starting to get the idea of the brushless. I am at Robodojo this Sunday so hopefully will catch up there if you are all about. Will also do some more digging whilst...
  11. Replies
    8
    Views
    2,331

    Thanks Gents, Getting the general idea, looking...

    Thanks Gents,
    Getting the general idea, looking at costs and what set up has been described above I get the feeling that brushed is a cheaper route but compromises the performance when considering...
  12. Replies
    8
    Views
    2,331

    Many thanks Alex, Interesting points, so...

    Many thanks Alex,

    Interesting points, so basically brushed are more forgiving when put into stall mode?
    I've had a look at your set up on the web, seems quite a nice system there. Do you need a...
  13. Replies
    8
    Views
    2,331

    Hi Alex, Thanks for coming back with the...

    Hi Alex,
    Thanks for coming back with the explanation. By the way the drive looks really neat.
    With so much power on a FW how do you stop wheel spin? Thinking of control issues. I seem to remember...
  14. Replies
    8
    Views
    2,331

    Brushless verses Brushed Motors

    Hi all,
    Being old school I still use brushed motors for my FW but am looking at the possibility of going brushless.
    Brushless motors from what I have read across the web are a totally different...
  15. Replies
    25
    Views
    4,242

    Hi Matt, Never having an active weapon I cannot...

    Hi Matt,
    Never having an active weapon I cannot suggest from experience, however from a personal prospective, I would go with two separate batteries. Two reasons: 1. you can tune the battery to the...
  16. Thread: Chain Drive

    by Triceratop
    Replies
    8
    Views
    2,980

    Hi, just thought I'd throw my two pennith in.......

    Hi, just thought I'd throw my two pennith in.... stay away from #25 chain (mini moto). The chain is very strong and sprockets quite small due to the pitch but the chain is not forgiving on...
  17. Replies
    5
    Views
    1,591

    Thanks Michael, James for the clarification.

    Thanks Michael, James for the clarification.
  18. Replies
    5
    Views
    1,591

    Removable Link Position on a Flip-over FW

    Hi Everyone,
    Can anyone advise please, if the removable link on a flip over featherweight has to be accessible from both sides (top and bottom) as per a HW or a one side access only is required?
  19. All signed up for the FW Sportsman, Triceratot...

    All signed up for the FW Sportsman, Triceratot almost ready.
  20. Thanks for the clarification Ian

    Thanks for the clarification Ian
  21. Replies
    6
    Views
    2,367

    OK, many thanks.

    OK, many thanks.
  22. Hello Ian, There seems to be some conflicting...

    Hello Ian,
    There seems to be some conflicting event dates.
    Your earlier message say's 20th Oct for AW and 21st for BW. However your last message states 21st Oct for AW's with no revised date for...
  23. Replies
    6
    Views
    2,367

    Hello Ian, When is the sign up for the FW...

    Hello Ian,
    When is the sign up for the FW Sportsman Competition please, are spikes allowed and is it a weekend event or one day?
    Finally, are you still running competitions for BW's, if so when...
  24. Replies
    131
    Views
    25,074

    Looking good Michael, best of luck, let us know...

    Looking good Michael, best of luck, let us know how you get on.. :D
  25. Replies
    10
    Views
    4,031

    Hi Sean, I've fitted a couple of these to my BW,...

    Hi Sean,
    I've fitted a couple of these to my BW, seem to work really well. You can find them on Ebay for around £10ea, shipped in UK.
    Electronic Speed Controller ESC 60A For Hobbywing Quicrun RC...
Results 1 to 25 of 99
Page 1 of 4 1 2 3 4