Hi all I have x2 esc's that are new I am unsure as to what to do with them at first. Do I need to programme them in or just plug and play.
Printable View
Hi all I have x2 esc's that are new I am unsure as to what to do with them at first. Do I need to programme them in or just plug and play.
That all depends on what they are and what you want to use them for?
GoolRC 320A 6-12V Brushed ESC Speed Controller w/ 2A BEC of eBay. And they are just for forward and reverse control on the wheels
Shouldn't need modified then. I don't see them being up to much though, the rating are exaggerated to say the least but hopefully they work for what you want them for :)
Oh, the blue ones. Forget it if for a featherweight.
They are great smokebombs if you do anything over 8V with a batterydrill motor.
Reverse is not full power either making building a drive with them "special".
First thing you need to do is take off that Tamiya plug for the battery. A so called 320A ESC with a Tamiya plug, Chinese will just print anything on the box as long as it sells.
I believe the 320A comes from the sum of the FET ratings. So either 4 80A fets or 8 40A. But that doesn't really matter because the crappy wires and thin traces will probably melt first. The pair I bought didn't even go between forward and reverse without a 1 second delay.
So basically these was not a good buy haha hopefully get some use out of them even if it's just to gets use to the 'feel' of the robot