Team Combat Penguin bargain bucket bonanza sale

For sale:

1x unused 9.6v drill motor w/ grub screws and reverse thread screw £10
1x of the above but with snapped output shaft £5
2x 75mm robochallenge wheels with nut insert £8 for the pair
2x mini moto wheels, 1 is missing a bearing £5 each
1x hobbywing 10 amp brushless esc £5
1x 100mm stroke 50mm bore ram with front and rear pivot £25
1x v tail mixer £3
1x large homebase axe, fibreglass shaft about 90cm total length £20
1x 24v drill, no charger £20
1x 18v drill with charger, battery dyeing and casing cracked motor fine though £15

also for sale:

140mm bore 120mm stroke gravity style full pressure ram, mario made. 3, 1/2 inlets. selling because sponsor pulled out so i am left without the cash to complete a full pressure heavyweight, taking my heavy in a different direction and building some sort of low pressure flipper. for those of you ram size junkies yes it is bigger than the one in team invade's new heavy! £sensible offers considered

i can put up pictures of any of the above, just ask. would accept/part exchange the following: pillar drill, 100mm-125mm bore 200mm-250mm stroke low pressure ram, victor regulator, bosch 750(s), front kart wheels, wotty or roboteq speed controller

I've decided to keep the fp ram for the mean while

fp ram back up for sale :(

new items:

11bar prv £10
40mm bore 50mm stroke lp ram with rear pivot £10
unused trevor regulator £40
brand new unused chop saw+3 blades-perfect for cutting box section £ 50
15x 1m lengths of 25mmx25mmx2mm steel box section £3.50/metre

all other items still for sale

Our ram size is silly, the one you have would pack one big flip and eat up gas :lol:

15 good flips from a 5kg bottle, pulsed valves for 10bar self right :)

3 metres of box section, 75mm wheels, lp prv and possibly v tail mixer sold.

also for sale:

brand new battleswitch £15
titanium box, few holes in. used it to mount electronics in previously. £10

possibly more to come

How big and how thick is this titanium box?

Might be better than the steel I'm currently planning to put on my ant.

Interested in the Trevor regulator pm sent

From memory the titanium is about 1mm thick, I'll measure it tomorrow for you as I forgot today

battleswitch and trev reg gone

sorry for tking such a long time, titanium box is 20cm long 10cm width 10cm height approx

heres a picture of the 50mm bore 100mm stroke ram:

http://i990.photobucket.com/albums/a...m/IMG_0428.jpg

Whats the max pressure for the ram Jonny?

Its already gone im afraid jarvis

I got a similar one 100mm stroke, 50mm bore, 16 bar pressure without the pivots for sale if you are interested