Gary's Garage Sale

Had a look around and realised I have a hell of a lot of stuff that I'm never likely to use again so I might as well get some cash back for it and see it go to good use. All items are plus postage (whatever that happens to be). First to post their interest on the thread gets priority.

Vapex nimh batteries

2 x 12v 3300mah packs and 1 x 6V pack. The 12v packs are two of the 6v packs wired in series but I don't want to separate them. 12V packs have anderson connetors. Never been used in combat. Were used in various projects for basic testing.

12v pack - ten quid each
6V pack - five quid

Drill motor

Brand new. Never used in anger, not even had grub screws inserted to jam up the mechanism. Reverse screw and mounting screws included. 12V, 10 quid

I will have the 2 12v packs and the drill motor if that's ok.

PM me with the paypal info and I will send the money tonight if you want.

thanks
Craig

sweet. I'll get them packaged up today so i can get a rough price for postage.

Thanks Gary

pm sent

Pm sent too :D

what type are the 6v is you can get more info cos I need 12v but ill get another 6v
thanks
archie team fire force

It's a vapex 3300mAh 6V battery pack (bought new off ebay a few years ago).

I have actually found another 6v pack however I am not sure of it's condition. It hasn't been charged in a long while. I am going to cycle it a few times to guage it's condition and will let you know if it's in a decent condition.

I'd be happy to sell you both 6v packs (assuming that the second one is in a good condition) for a fiver each plus postage. PM if you are interested archie.

next item, 5mm plate of hardox 400. dimensions change slight on two edges however at a minimum the plate is 800 by 450mm. Looking for 60 quid plus postage.

I'll have it Gary, le tme know postage cost.

Magic Alan I'll get it packaged up tonight and weighed.

2kg empty CO2 extinguisher, with screw top, tested 2006 next test 2016. 30 quid plus postage.

what psi cos im interseted

Archie I don't want to sound patronising but I realise that you are relatively young (going by your profile). Do you have access to an adult with experience using high pressure pneumatics (200bar)? This fire extinguisher would also only be suitable for use in a heavyweight robot.

archie start with a antweight robot it is simple and good to start on and is cheeper

any news on the 6v packs?

Yeah both of the remaining packs I have are in good nick. Gave them a few charge/discharge cycles and they held a full charge.

Technically Archie was in there first with his interest so I'm giving him first refusal.

alan i sent you a PM about the plate

ok the two 6v packs are back up for sale, 5 quid each plus postage

Bumping this up because I want rid of them. Still got the 2kg CO2 fire extinguisher and two 6v battery packs up for sale.

fire extinguisher is sold.

Next item, 2 x 75mm nut insert robochallenge wheels with tyre tread screwed on around the circumference to improve grip. They have a fair few chunks out the side and have been well used in boner/original drumroll but they have a lot of life left in em.

Brand new they are 12.26, looking for 5 quid plus postage for them.

I'll take them. Where do you want the money?

Still got the battery packs up for sale. 5 quid a pack. I can bring them to the champs but need to know in the next couple hours.

Is the 2kg gas bottle still on offer ?

no that went to pete

Next bunch of stuff for sale

- 2 norgen 16 bar double acting rams. 50mm bore, 10mm stroke..... 25 quid each
- 4 bosch 35w motors ..... 10 quid each
- 1 50:1 all metal gearbox motor, 4.5v to 15v .......... 10 quid
- 1 A123 cell ....... 3 quid
- 1 12v 4Ah SLA ....... 5 quid
- 1 SLA unmarked ........ 5 quid

(don't have my multimeter on me atm to check voltages etc of batteries but i will offer a refund if you buy them and they're duff, shouldn't be a problem though)

- 1 DX6 transmitter - Transmitter only, no receiver, this is the older DSM1 technology so only works with older BR and AR receivers. I have modified it slightly, the throttle channel pot is mounted on the side of the transmitter (to control spinning weapons), the charging plug has been rewired to use a futaba transmitter charger and one of the shoulder switches was removed but i still have it. I can undo any or all of these changes should the buyer wish. Still works absolutely fine. Only reason i'm selling it is because i converted my old futaba 6ex to 2.4GHz. Looking for 50 quid for the tx.

All prices are excluding postage. I am also in the middle of exam period atm and so won't be able to get back to my workshop to post the items for a couple weeks (sorry!).

Still got the two 6v nimh vapex packs up for sale too.

Pics can be found here http://s1216.photobucket.com/albums/dd379/Gary_Cairns/

I'll have the Bosch's Gary, if they're still available. Can collect them at Edinburgh.

Alan they're yours. You want all 4?

Yeah

sweet, 4 bosches are gone. Rest still there.

Btw it cool if I bring boner along to the edinburgh event? Toss it in with whatever other feathers are kicking around.

Yeah, no problem, will have a feather fight in the show, as long as you keep your finger off the 'spin' button :P Peter Bennett has said he will come along.

lol I don't have a working brushless speedo so no danger of that happening :)

Was speaking to him via email. Might spend a bit of time working on typhoon 2 this summer, see if we can repair it from it's current sorry state.

I'll have one of the cylinders if you can explain to me how I can rear mount it on a pivot!
Thanks
Dan

I believe that there are mounts that you can buy that slot onto the back of cylinders allowing you to have a pivot or you make one yourself. Any of the guys that actually use pneumatics on a regular basis give a hand on this one?

Such things do indeed exist, I have one here and places like Airlines Pneumatics (which is where I got mine from) will sell them for decent prices. (I am actually contemplating clearing out a lot of my unused featherweight gear since I decided against pneumatics, but that'll be a sale for another time)

Pm sent! :proud:

that's one ram gone, one left

gary, is that ram still available?

yeah there is one ram left. If interested PM

pm sent