someone have some hardox
(for a featherweight)
theo
Printable View
someone have some hardox
(for a featherweight)
theo
you will need to specify size and thickness as there is a wide range of dimensions
much you after? I got a fair bit of 5mm and possibly some 4mm kicking around. Also, you got the tools to machine it?
If there's some spare hardox afterwards please can I have some :?:
Well no one has asked me for any. How much do you need and do you have the tools to safely machine it?
Can I have some hardox please? :)Quote:
Well no one has asked me for any
May well need some for making the outer armour of D2. Not much, maybe some offcuts, but will talk to you on Tuesday (and maybe bring a cardboard mock-up of what I'd need) to see if you think you'd have anything suitable.
no worries mate, mock something up and i'll let you know. No promises on anything though as I know i have a relatively large piece of 5mm but only small bits of 4mm and I know thats what everyone always wants :)
It's early days yet but I reckon I'll have enough weight spare to go for some 5mm stuff. I'll probably need the extra thickness with what is emerging from some people's workshops! But yeah, will bring the chassis and a mock-up along and we can work something out.
If you have a large of cut Bigger than 40cm by 15cm, The thicker the better, can I have it? :?:
PM sent
hi sorry my internet is down (im at my grandma)
has all the metal all gone :?: :?: :?:
if it hasn't, how much would 20 x 12 weight & how much £
if its gone where can u get some
dont mind how thick but at least 4mm please
I'm in glasgow for a few days and so I can't give you gents yes or nos to what i have and am able to supply (workshop is in edinburgh). Once I get back I'll take a look and let you know. My other problem is that my 230mm angle grinder burned out the other day so I'll need to get a hold of another one, but don't worry, I'll sort out these problems soon enough! :)
lol hi my robot had a big floor :oops: in it :lame:
so my robot disign has changed but i still need some hardox
the new sheet i need is 4mm (thickness) or bigger (not that fussy) 25 x 12
thx theo
and how much will it weight?
and how much money do u want?
theo
r u back yet
and have u fixed the blade :lol:
offer still stands 4mm or thicker 25 X 12
theo
Got a new angle grinder but I'm not going to be able to get any hardox cut until the 11th of Sept at the earliest. I'll be back in the workshop for 2 weeks but again theres no guarantee I'll have the time. I'll do my best but my drag racer and boner are my top priority when I'm back :rofl:
That's ok i can wait :|
offer still stands 4mm thickness (or thicker) 25 X 12
Theo
updates !!!!!!!!!!!!!!
do u have some hardox leaved
Theo
Theo, I do but I've not had a chance to dig it out and cut what you need. All my time the past week and a half has been spent on my power tool drag racers and featherweight for the up and coming comp at Yeovil.
Considering this competition will probably cost me a good 2.5 grand by the time it's over, I'm sure you can understand why I haven't had a chance.
Yep I can understand
don't worry to much I am not in a rush but how
much money do u want for it
(not lots I hope)
Theo