FS: Bits and bobs

Hey guys,

Was sorting through my robot bits today and have a few bits and pieces that I want to get rid of, either because I haven't used them in ages, have no plans to use them, or simply don't need them anymore.

An Attack 2ER two-channel transmitter and receiver, running on 27MHz AM. Comes in its original box, but has no servos, RX battery or switch harness. I have included 8 x AA Energizer batteries (briefly used) to power the handset and also three sets of crystals. The frequencies are 27.045 (Red), 27.095 (Orange) and 27.255 (Blue). £15 + £5 P&P

http://i31.photobucket.com/albums/c3...m/DSCN4317.jpg

A four-channel Hitec Laser 4 transmitter and receiver, running on 40MHz FM. Doesn't have a box but will be packaged securely. Again no servos, RX battery, switch harness or battery charger. Does include a Nicad pack for the transmitter and two sets of crystals. The frequencies are 40.695 (Ch 53) and 40.815 (Ch 81). Built-in V-Tail and Elevon mixing £20 + £5 P&P

http://i31.photobucket.com/albums/c3...m/DSCN4319.jpg

Eight Nicad battery race packs. They are 7.2V and 1800mAh, not a huge capacity for feathers but when I used these I ran four packs in total. Two pairs connected in parallel to double the capacity to a more useful 3600mAh and then connected both those in series for 14.4V. These packs come with Tamiya connectors fitted. There are a couple of small nicks in the plastic covering but all cells are undamaged. They've not had the best cycle treatment under my use but they've not been used much (2 competitions) and would be good with just a little charging TLC. FREE - £8 P&P

http://i31.photobucket.com/albums/c3...m/DSCN4323.jpg

Ansmann AC 30 chargers, specifically designed to trickle and fast charge the above batteries. I have two of them. The fast charge is timer-controlled, its takes roughly 30 minutes for a fast-cycle. The chargers are quite heavy, hence the large P&P. £10 for the pair + £10 P&P

http://i31.photobucket.com/albums/c3...m/DSCN4329.jpg

Two OKIN Betadrive linear actuators. 24V, 50W, 4000N (400kg) force. I was going to use one for the crusher in Snakebite (and the other as a spare) but since that has been postponed several times, by the time it actually gets built mini-hydraulics will probably be all the rage :)
One is pretty much a complete unit with working limit switches, the other has the plastic casing round the motor cut off and no working limit switches (but the wires are still there for them, so they can be connected up somehow). They both weigh about 2kg each. £10 each + £7 P&P each

http://i31.photobucket.com/albums/c3...m/DSCN4325.jpg
http://i31.photobucket.com/albums/c3...m/DSCN4327.jpg

Reply here, PM me, or email me at lenny_1024(AT)hotmail.com if you're interested in anything. I'd like to post most things just to clear up a bit of space, but I'd also be happy to bring things to an event (12th/13th September, Robo Challenge) should anyone wish to collect.
All pics also at http://s31.photobucket.com/albums/c367/ ... cs/Random/

Thanks

Hi Jamie,

I'm interested in the Nicads and the 40mhz radio gear, if they are still available.

Ian

Hi Ian,

PM Sent

Thanks,
Jamie

dam! Wouldn't have minded a couple of those nicad packs for bench testing

me also :(

im interested in the actuator tho, drop me a line :)

jack

Sorry guys, Ian was very quick off the mark :)

Jack, PM sent about the actuator

I might have a friend thats intrested in those NiCD, if they are still available

any of those nicads left ? i would buy at least 2 - 3 of em

Sorry Joacim and Tom, but at the moment all the Nicads are taken

dang :angry: lol

i will take the complete actuator if it is still for sale. drop us a pm, can pay via paypal or send a cheque, thanks.

All Nicad packs and 40MHz transmitter/receiver combo sold
Complete actuator sold

Actuator with non-working limit switches now has working limit switches and is exactly the same as the complete actuator with exception of the cut off plastic motor housing.
Actuator, chargers and 27MHz transmitter set still for sale. Probably on eBay at the end of the week

Hi Jamie,

Radio gear and batteries turned up during the week. Now all I need is lots of cardboard to biuld a 3d archery target to go on top of the robot.

Thanks again,

Ian

pm sent :)

hey

paying 4 actuator tomorrow sorry for delay, my dad just got back from a business trip so i couldn't pay via paypal now i can...so yh :)

jack

actuator arrived :)