10mm piece of steel

Hi all

looking for the following

10mm x 100mm x 60mm steel piece

looking for as cheap as possible, any body with an off cut around this size etc please post

thanks alex

Alex,

Ive got a strip of steel we used for BOOM!, I think its 60mm x about 600mm x 8mm. Its stuff I picked up off a building site so didnt cost anything. It does have pre-drilled 12mm holes at about 300mm centres.

If its any good, its yours. You just need to pick it up or pay postage.

Andy

when do you need it for? my dad can get 9mm from work but hes not at work for another 5 weeks

Ill see whats in the workshop tomorrow.

thnaks guys ill see if Tom has anything and then see which would be best

thanks for posting

alex

also lookng for some 4mm hardox or steel

80mm x 180mm

again anyone who can help?

cheers

I cut you some today incase you still need it. 100X60X10.
Just cut it off a length of 100X10 flat bar.

(Message edited by xtreme on February 27, 2009)

email sent Tom

Alex Got u the 100X60X10 Steel ready to send for tomorrow, Also i have a some 20mm Dia HDPE rod, I have a 100mm offcut if thats an ok for you, Dont think iv got any 4mm steel, I think I have 1,2,3,5,6mm and up but dont think i have any 4, Ill have another look tomorrow, Ill send the HDPE (if that size is ok)and the 10mm Steel in the morning and if I find anything else ill send u it later.

thanks Tom yeh the hdpe sounds good just email with postage payment details

thansk for your help

alex

It will only be a couple of quid at the most dont worrie about it.