Clear-out sale

Clearing out a load of my old gear, hoping to concentrate on one or two robots at a time and can't see me getting to use a lot of it.

------------------------------------------------------------------------------------------------------------------------------------------------
Eric Jr - Featherweight

Originally shockwave (I think?) made by Will Thomas but has been updated over the years. Was my main robot alongside Cicatrix for about 3 years that I used at non spinner events. Its a LP pneumatic flipper that includes.

Trev Regulator
Ram
Solenoid
Scorpion XL ESC
Gimson GR01's
Gimson Wheels
Battleswitch
20oz Paintball tank
BEC (scorpion BECs at the time were unreliable)
and maybe more that I cant remember right now....

10mm Polycarbonate all round except the flipper arm. Needs a bit of work to get it going, but as it needs upgrading anyway the new owner may want it as is. If I have the time I'll do a bit of work on it if the new owner wants to get it a bit closer to battle ready. At the moment it doesn't have a battery or radio gear, but I do have some that could be added in with the sale.

SOLD

http://i1214.photobucket.com/albums/...psulzinc3k.jpg

http://i1214.photobucket.com/albums/...psfekevyse.jpg

http://i1214.photobucket.com/albums/...4-14-55-57.mp4

------------------------------------------------------------------------------------------------------------------------------------------------

Scot Bots MW

Formally Tanto Jr MW but we had plans to make it into a HW(ish) to be used as a house robot but wondering if it could be better served elsewhere. Aluminium frame with 5-6mm Hardox and go kart tyres. Was recently painted in gold and blue....because its what we had. Used 2 x Bosch 400's for drive. Plan was to power it from a set of LiPos that I bought, but again, considering letting someone else have a go with it instead.

SOLD


------------------------------------------------------------------------------------------------------------------------------------------------
T-Bone HW

Former Robot Wars Robot T-Bone, consists of the HDPE shell, scoop, weapon motor, motor pods and weapon assembly. I have a set of wheels that can be thrown in too. Will need a lot of work to get it going as its pretty much just a shell, but I've a different angle to go on now with HWs. Will most likely need to be collected.

SOLD

http://i1214.photobucket.com/albums/...5-14153831.jpg
------------------------------------------------------------------------------------------------------------------------------------------------
2x Optipower 6S 5000mAh LiPo

Pretty much says it all, with deans connectors added. Bought from Terry on here recently but too big for my robot, really need a 5S instead. Bought for £60 a piece, haven't been used so would ask for the same back

SOLD

------------------------------------------------------------------------------------------------------------------------------------------------
2x 24v 3Ah NiCad HW Pack

Originally from Tanto Jr, old school packs that I will make sure still work properly before sending. Not modern technology by any means, but cheap so could be ok for someone looking for a start.

SOLD

http://i1214.photobucket.com/albums/...pshrcqizzz.jpg

http://i1214.photobucket.com/albums/...pszgssxabr.jpg

------------------------------------------------------------------------------------------------------------------------------------------------
Gimson GLA6000 Linear Actuators

100mm stroke. Intended to go on the Housebot, but its been years so again....might as well give someone else a go. Similar actuators on eBay going for about £99.

Specs from Gimson Robotics: http://www.gimsonrobotics.co.uk/GLA6...-actuator.html

SOLD

http://i1214.photobucket.com/albums/...pslwnsfjjg.jpg

------------------------------------------------------------------------------------------------------------------------------------------------
"Marine" ESCs

A pair of these : http://www.ebay.co.uk/itm/JP-Marine-...wAAOSwwpdW8Uwc

Came with Eric Jr before I upgraded to an XL. Could drive a basic drill driven robot easily enough, in Eric Jr they originally controlled the drive consisting of 2 drill motors with 75mm wheels at 14.4v. Plan was to use them on the LinAcs in the Housebot but would work nicely for drive too.

£40 the pair

http://i1214.photobucket.com/albums/...psqg35imiu.jpg

------------------------------------------------------------------------------------------------------------------------------------------------
NiMH Battery 9.6v

Cicatrix backup battery, no longer needed as I would upgrade if I ever decided to change Cicatrix. Might be useful to someone. Tape was just there to tell me whether that was set A or set B

SOLD

http://i1214.photobucket.com/albums/...psjyg0pqoz.jpg
------------------------------------------------------------------------------------------------------------------------------------------------

Prices don't include postage. I have more to add....but that's taken ages so i'll do it another time!

Scorpion XXL (modded from an XL)

Used in Cicatrix for years, it was a modification to the XL when XXLs were unavailable. Was a "official" mod (i.e. not done by me) from the European repairer of Robot Power products (can't remember his name, sorry!). It is a bit "quirky" in that it works with a motor connected to each output pretty well, not quite as smoothly as the modern XXLs, but when connected to 2 motors on each side it gets very confused and starts to limit the current for some reason. Tabs were removed long ago as the were awful in that generation of XL and wires have been soldered directly to the board.

SOLD

http://i1214.photobucket.com/albums/...pszeno177v.jpg

What's the spec on the optipower packs? Discharge, charge etc? Or even a pic of the label would probably be quickest!

Oh and dimensions too :)

Cellular PM sent. Gotta keep up the tradition of buying and selling parts between ourselves :P

Scot-Bots House robot sold

Scorpion XXL Sold!

Sabertooth V2 2 x 25A

I bought this as a backup for Pilgrim, used it a few times in there but hasn't been used in combat

£60

http://i1214.photobucket.com/albums/...pspdgcnezh.jpg

------------------------------------------------------------------------------------------------------------------------

Beetleweight Robot

4WD FBS BW, originally built by Tom Armitage (I think?)

Includes
Aluminium chassis
5A Sabertooth
4 motors and wheels
Brushless ESC
Brushless Motor
Toothed belt for weapon

SOLD

http://i1214.photobucket.com/albums/...psgroc0fzv.jpg

If i've posted something trackable to you, numbers should be in your inbox

4QD NCC 35 24v ESC

Should have 2 of these somewhere and possibly the rc unit, old school controllers but might be useful to someone.

SOLD

http://i1214.photobucket.com/albums/...pscqqvy2oy.jpg

I've updated whats sold and added prices to everything in each of the above posts. A lot of questions about EJr, so added a price for that too with and without ESC.

Trev Regs

CO2 regulator for LP pneumatics, ideal for combat robots. I think I have 2 of these, could be useful as spares for someone.

£30 each

http://i1214.photobucket.com/albums/...psiy7aebkj.jpg

Attachment 5825

FW Drumbot

Bought just before the championships but considering selling it on and making my own from scratch as I might have the time now.

2 drill motors and Robochallenge wheels
1 Speed 900
Pulleys and belts
Machined drum and hardox teeth
Aluminium chassis

Good wee project for someone and weighs under 7kg at the moment so plenty of weight for Hardox.

SOLD

Better photos of the robot on the original sale thread

http://www.fightingrobots.co.uk/thre...project-e-1337

If anyone is interested in any of the larger items (or any of the items) I still have for sale im considering going to Manchester next weekend for RW with the FWs for a bit of a mess about. If anyone's wanting anything brought that's possibly they best chance they'll have of my being able to take them down this year.

From my other thread just to keep it all in one place...

Single Channel HW ESC, 120A

http://www.robotmarketplace.com/prod...Q-AX3100S.html

Hasn't been used, bought for the Dalek but have just been using TZ85's instead and they work fine. Comes with the CD for programming.

Paid £100 for it from what I remember, looking for the same posted.