Printable View
Time to clear out some of the bits and pieces taking up space that I haven't used in a while.
- Thunder power TP 1010C charger and balancer. An older lipo charger but still a good one. Will handle up to 10s pack size and charge at 220w (depends on pack size for current).
- Hyperion Vx G3 lipo pack. 4200mAh, 5s, 35C discharge.
- Perm 080 motors. 1 working, 1 for spares or repair.
Pictures to follow along with other bits and pieces as I come across them. PM me with offers / questions.
Finally got around to taking pictures and pulling out some other bits and pieces that I'm happy to let go.
http://imgur.com/a/B7mWV
So in summary,
- Thunder power TP 1010C charger and balancer. An older lipo charger but still a good one. Will handle up to 10s pack size and charge at 220w (depends on pack size for current).
- Hyperion Vx G3 lipo pack. 4200mAh, 5s, 35C discharge.
- Turnigy nano packs - 5s, 2.7Ah X2 (used for drum in boner)
- Turnigy nano pack - 6s, 1.3Ah (used for drive in boner)
- Perm 080 motors. 1 working, 1 for spares or repair.
- Mix of bane bots wheels, some used some not, some with nuts for drills in the middle, some not.
- Two linear actuators that I was going to use with the SMIDSY rebuild that never happened. Suitable for feather or heavy.
- 1 low pressure ram
- Melty brain feather disc and electronics (open source)
If you want any more info on any of the above or want to make an offer then please drop me a PM.
How much would you want for the linear actuators? (also what is their stroke/reach?)
Tim I'm afraid the linear actuators have been sold.
just watch you win series 7 on my skybox from last night, what happened to the perm mate ?
I ran it no load on 8s. Didn't seem to like that as it started spitting copper out at me. Cue a quick change out to an etek.
Charger sold
Still got all the lipo, wheels, pneumatic ram and melty brain project available.
....And the big ones please
Small ones are 3-7/8"
large ones are 4-7/8"
Working Perm has been sold!
How much for wheels and charger mate
Mark, charger is long sold I'm afraid. Which wheels are you interested in?
Smaller ones and no problem about the charger
PM sent
Found something else during my adventures finding stuff in storage.
A bit of pipe!
But this is no ordinary bit of pipe, no no. It's a bit of pipe with a cut through the middle!
So the story behind this is that it was a test piece used on an explosives course that I attended a year or two ago. It was used with a flexible shape charge that blasted the cut through the middle (roughly 180 degrees around). They were going to throw it out after we were done but I asked to keep it with the intention of using it to build a heavyweight drum spinner one day. Well that's probably not going to happen so I thought I'd offer it up here and see if anyone is interested with the re-emergence of a certain TV series. You could either continue the cut and have two sections or even fill in the gap with weld material.
Stats -
- total weight - 15.4kg
- diameter - 230mm approx
- length - 300mm approx
- wall thickness - 9.25mm approx
Pics below. Make me an offer if you are interested.