Printable View
Hi all, few things for me to sell.
I bought these 2x 63 bore 100mm Stroke from John, as were used in Ripper Evo, but I've opted for a custom made ram instead.
viewtopic.php?f=166&t=5008
I paid £40 and would like the same for them.
I have a former pay to drive robot from Rebel Robots that'd like to sell as well, I'll post pictures and details over the weekend.
Also have 3 Antweights to sell, again details of them will appear over the weekend.
PM me on here, or leave a message
While I appreciate all the messages about the PTD robot and ants, more info will be posted over the weekend
I've got 2 featherweight robots, they were used at pay to drive robots. Could be used as Raptors(?)
They use 12v 300rpm motors, 12v Speed Controllers, 12v 2100mah Nicad, base is 4mm Steel sides are 12mm Dural, comes with 4ch Tx and Rx from Giant Cod
http://i1218.photobucket.com/albums/dd4 ... 2039-1.jpg
This is the flipper, inside is a Giant Scale servo, however I'll have to remove it as its burnt out £80
http://i1218.photobucket.com/albums/dd4 ... 012041.jpg
This is the 4WD bot £100
http://i1218.photobucket.com/albums/dd4 ... 012040.jpg
They need their wheels changed as they have solid nylon wheels which don't offer much grip, they also have no power light or link but I will fit them this afternoon/evening so they are legal for combat.
Will post details on the Antweights tonight.
better late than never right?
I've modified a Chaos 2 toy to be an antweight, with 2x high speed modified servos for drive, a servo for the flipper, 2s LiPo cells, does not come with a radio and the radio you will need to put in it will need to be a micro rx
http://i1218.photobucket.com/albums/dd4 ... 012048.jpg
http://i1218.photobucket.com/albums/dd4 ... 012044.jpg
http://i1218.photobucket.com/albums/dd4 ... 012043.jpg
PM me with offers
are they naro pico servos?
they're the GWS Pico servos, same as Ian Swann used in the original Chaos 2 ant/toy modification
how about a video
Have you still got 2 more of em to post info on?
I've decided to drop the price of the feathers/raptors/former pay to drive robots to
£60 for the 4WD bot and £50 for the flipper bot,
I'm looking for £40-50 for the Chaos 2 antweight, I have people interested so be quick if you want to make an offer.
Other ants will follow and I'll make some videos hopefully this evening and up load them to youtube later if I get time. I'm off to Madrid in 2 weeks so need to shift everything quickly as possible so I am open to sensible offers
if you are coming to guilford I´ll pay 100 pound for both FW ...
I'm not but if you want them I can make sure they're there for you
can I give the money to some roboteer and he will give it to you ... ? because transfering the money is very difficult from belgium to england ... ? if so they are sold ... :proud: :proud: :proud:
feathers are sold
24v Pancake motor used to drive a Full body spinner feather, but no longer required. £15
http://i1218.photobucket.com/albums/...817_200142.jpg
Digital Scales from Rebel Robots £25
http://i1218.photobucket.com/albums/...817_200129.jpg
MiG Welder only used once still brand new really. £100
http://i1218.photobucket.com/albums/...817_200124.jpg
finally Tanto Jnr, last used as for Tanto for RoboGames this year, selling it in its original set up as a middleweight, with 4mm hardox armour, 9:1 half inch chain drive, 2x Bosch 12v 400W, 2x 24v 3Ah Nicad packs £250
http://i1218.photobucket.com/albums/...817_200055.jpg
if you're interested please PM me or respond here
PM sent
What model is the welder?
Could you tell me what the full height of the pancake motor is including the axle bit (can't think of the correct word :crazy: )
Is it comparable to a car fan motor?
- MouldyLocks
its a Siegen Mig 130, got it at christmas and was only used to finish Scrap Dog which was about 30 mins.
-Max
Motor Body is 11cm dia, 5.5cm tall, shaft is 6mm dia, 20mm long
does it come with receiver and all the other electrical bits :)
I assume you're talking about Tanto Jnr, no it doesn't they are in Tanto HW and are needed
I assume you're talking about Tanto Jnr, no it doesn't they are in Tanto HW and are needed
If dave doesn't take the welder I will
Hands of Gaz :P
Whats the best way to pick up the welder Craig? You going to be around Cannock anytime soon?
Tanto Jnr Sold
Welder Sold
Scales Sold
some more stuff coming later on tonight
2x Giant Cod Transmitters and Receivers £15 each
http://i1218.photobucket.com/albums/...821_153707.jpg
Robot hoover old and basic but a bit of fun £20
http://i1218.photobucket.com/albums/...821_154617.jpg
Large CO2 Bottle, bought for Rebel Robots, Bottle is full £150
http://i1218.photobucket.com/albums/...821_153927.jpg
as last time pm me
Pm sent
pm sent :D
Transmitters and Robot Hoover gone
More to sell
Antweight, Titanium and Aluminium construction Brushless motor with solid titanium disc, 50:1 motors with foam wheels. £60
http://i1218.photobucket.com/albums/...825_160904.jpg
http://i1218.photobucket.com/albums/...825_160854.jpg
Briggs and Stratton Etek, as used by the House Robots, Son of Whyachi, 259, Nightmare, this is my last one from Tanto £100
http://i1218.photobucket.com/albums/...824_161102.jpg
pm sent
well that was quick, Etek and Ant sold
Transmitter back for sale
are the transmitters fully working and bind well?
cheers