Team Shock Winter Sale

Got a few more things up for sale- PM offers

First up is my Beetleweight- Built a while back and has not been used- needs rewiring. Includes

5mm HDPE chassis
2x 11:1 MFA motors with Custom wheels
Sabretooth 10A ESC
2, 2cell, 1000mAh Lipo packs
Spektrum AR6200 rx
Drum Spinner with large brushed motor on 1:1 ratio via timing belts
Blue speedo for drum
Designed to have interchangeable weapons so the drum can be removed using 4 screws
http://i881.photobucket.com/albums/a...k/712396db.jpg

Spektrum DX5e Tx.
http://i881.photobucket.com/albums/a...k/d737fa4f.jpg

Several Antweight Shells

These include the 3D printed fleaweight shell and flipper arm from Shapeways- 2mm thick with mounting points for base plate.

Ant Awe 6 shell- used for a couple of years- some slight damage

Carbon fibre and Vacuum formed shell- based on Thor, never completed
http://i881.photobucket.com/albums/a...k/d28d483e.jpg

Recoil- half finished fleaweight
3D printed chassis with carbon fibre shell
Flipper servo, voltage regulator and Lipo- no rx or drive servos
http://i881.photobucket.com/albums/a...k/217e7191.jpg

Lots of ant parts including

2x 50:1 HP pololu motors with wheels attached

1x Peter Waller option D speed controller

1x Technobots Z48 controller with RC lead- never used

1x Parkflyer HPXF servo

1x Aluminum drum- for 18mm outrunner motor- no teeth

1x 6ch 40MHz rx

1x 5g micro servo

1x Brushed single channel single direction ESC

2x 9g 360 degree modded speed hacked servos

2x 6g 360 degree modded speed hacked servos

1x 6v park BEC

http://i881.photobucket.com/albums/a...k/1a6d0c75.jpg

Next load of Parts will be featherweight bits including a LP pneumatics setup

Beetleweight Sold!

Time for a few featherweight bits

Old chassis built by students at my old school, 10mm HDPE with 2, 12v drills fitted on 75mm blue wheels
http://i881.photobucket.com/albums/a...k/2d4e1395.jpg

Few pneumatics bits

1x 50mm bore, 150mm stroke LP ram, 1/8 ports
1x 80mm bore, 80mm stroke LP ram
1x 40mm bore, 50mm stroke LP ram
1x 5/2 valve, 24v solenoid, 1/4 ports
2x Dry powder extinguisher bottles
Length of 8mm pipe
11bar PRV
Trev Regulator
Got plenty of fittings etc enough to complete the system
http://i881.photobucket.com/albums/a...k/aae021ad.jpg

Few more things to add.

2x Wheelchair motors, gearboxes and wheels- PHOTO TO FOLLOW

Set of mild steel claws from S7 version of Sawpoint
http://i881.photobucket.com/albums/a...k/8d6a51ec.jpg

Battlerat
My last one- this is the one I have modified to have an RC flipper now runs off a 7.2v Ni-Mh pack for added speed
Comes with AR6000 rx
http://i881.photobucket.com/albums/a...k/0202679e.jpg

Thats all for today- may have some more items listed over the next few days as we clear out the workshop.

Beetleweight, Fleaweight, Option D controller and aluminium drum all SOLD

how much are you looking for, for the ant awe shell ?

I've sent you a PM

Couple more items for sale,

2x Pro Peak Supernova chargers- £25 each inc postage or £45 for the pair

http://i881.photobucket.com/albums/a...k/3d69d666.jpg

1x X Peak Charger- £45

Mains or 12v input (mains lead included)
Charges 1-14 Ni-Mh/ Ni-Cad cells
1-5 LiPo cells
0.1-5Amp charging current

http://i881.photobucket.com/albums/a...k/9c3670b3.jpg

Have you still got the 80mm bore 80mm stroke ram? What sized ports does it have? Is it single or double acting? What does it weigh and how long I it? How much are you looking for it?
Thanks,
Max Medhurst

Yep, still got the ram- length is around 150mm, width 100mm, weight is just over 1kg. 1/4 inch ports

I'll get some more accurate measurements tomorrow.

Looking for around £30 plus postage for it

i am interested in the 2x 50:1 HP pololu motors with wheels
would be good for tobys ant, can you pm a price please i could
give you cash at whitwick, cheers will.

Quote:

---

Originally Posted by teamocean

Time for a few featherweight bits
Old chassis built by students at my old school, 10mm HDPE with 2, 12v drills fitted on 75mm blue wheels
http://i881.photobucket.com/albums/a...k/2d4e1395.jpg

---

What's the dimensions to this machine exactly?

We will be bringing most of the unsold items to Barnsley and will probably set up a table with everything on so if there is anything you are interested in let me know before then

how much for the reg?

PM sent

We will have a few more items for sale over the next few days- a pair of wheelchair motors, gearboxes and wheels another- part built battlerat and this.

Also may have a couple of 10A Sabretooth controllers if anyone is interested.

Whirlwind Chassis-
Used for 2 years before swapping everything out to Shockwave 2

Comes with steel frame, 5mm HDPE armour, 10mm HDPE base and steel box section flipper arm.

PM any offers

http://i881.photobucket.com/albums/a...k/7b6e1b51.jpg

PM sent

Whirlwind sold!