Daiske II

Considering selling off Daiske II as it is maybe a bit advanced a beginning for my team mates who were planning on completing it, they are probably better starting from scratch. At the moment its basically just an Ali baseplate with 2 x 24v Gold motors and either 75mm or 125mm Robochallenge wheels. I say either because the smaller wheels were for a pneumatic flipper setup and the larger wheels were for more of a wheely big cheese rambot setup, would be ridiculously fast in that setup though I would imagine. I did have it running on smaller wheels at 9.6v and it was even quick then.

http://i1214.photobucket.com/albums/.../Daiske2-1.jpg
http://i1214.photobucket.com/albums/...72-150x150.jpg

That was Jamie/Colins plan for it, but they're going to use more basic things instead i.e. drills and plastic instead of metal and golds.

For people who don't know about Gold motors I believe their spec is fairly similar to Speed 900's

Looking to sell just to add more funds to another project I have at the moment and also get Eric Jr some new batteries and wheels. I also have a few other bits and pieces lying around that may well be getting listed soon.

how much are you looking for?

Have FB'd you

Eagles eyed viewers will no doubt recognise it from the Team Hydra sale (as thats where I took the picture from) where I think I bought it for 70 quid with the smaller wheels so would like that back for it if at all possible. It looks a bit different as I have had to increase the arches to accommodate the larger wheels but i'll get photos tomorrow if anyone's interested because at the moment its f-f-f-f-very cold outside.

EDIT: Got your message and replied Jamie :)

Ohh and I totally forgot! It has sides too now, it actually looks very little like that photo :oops:

I hope Liam doesn't mind, but he has a FB photo I will now attempt to pilfer...

http://i1214.photobucket.com/albums/..._8057080_n.jpg

Ignore the white HDPE, that was put on just to make that photograph look like it was a complete robot and not just a rolling chassis... Still kinda frankenstein-y looking though :lol:

I'll take some photos tomorrow and post them too.

Anyway, the sides/back and motor mounts are 15mm RG1000. Motors are mounted to allow equal clearance top and bottom with a weight (Polypropelene maybe?) in the front to keep the nose down whichever way up it is. Not sure if its worth more/less as it is now compared to the first photo. I'll leave it listed for a few days and see how the offers go and see what i'll do from there. Also better confirm it with my cousin that he is definitely going the drill route.

pm'd you

Photos taken today:

Top, running correctly:
http://i1214.photobucket.com/albums/...2-12174915.jpg

Side view:
http://i1214.photobucket.com/albums/...2-12174947.jpg

Inverted running:
http://i1214.photobucket.com/albums/...2-12175008.jpg

Needs a bit of work doing to it and could probably do with bigger axles to make the wheels more secure.

did you get my pm ?

Indeed I did, i'll leave it a few days and get back to everyone, just seeing how much interest there is out there then i'll see what i'm doing with it :)

Ignore the white HDPE, that was put on just to make that photograph look like it was a complete robot and not just a rolling chassis... Still kinda frankenstein-y looking though :lol:

frankensteainy? these are frankensteiny
http://www.google.co.uk/imgres?q=franke ... YUK&zoom=1
:proud:

Yeah, it has bolts coming out the side to hold the wheels on and to help with self righting, frankenstein-y.

Also, have a few offers for the robot from people looking to hold off until after christmas. I have no problem holding off until then but will leave it open and if anyone wants it before then they can make an offer.

I sent you a PM, could you let me know what sort of number you're looking for?

Replied, not sure what photos exactly you want as I have a number of them above. Its the same as above but the wheels have gone to Jamie, but they have been replaced with the bearing boys blue wheels, perhaps not as good but will get you going.

Going to add a few more things over the next few days in the vain attempt to clear some space in my garage and raise a bit of funds, only bits though, no complete robots. Although maybe in January/February ill be getting shot of a pair of antweights after a school presentation, but will see how that goes first.

Sold.

Only other thing I have to list atm is a pair of 919D Series MFA Como Drill motors with metal mounts and wheels seen here:

http://i1214.photobucket.com/albums/...5-22211719.jpg

Open to offers on them.