robot market place large rc duel relay wont behave

its being rather temperamental atm, so much so that im making myself look a public idiot and asking for help... again :lol:

The relay is responding to the signals (i can hear it click) but the actuator will only turn one way. it cant be the relay signal since its responding and it cant be the actuator since the current must flow through both wires to complete the circuit.

i cant think what else it could be, it may be because im tired but im clueless to what is could be. i bet you lot are all getting sick of me now :)

anyone who has experience with this or similar relays offer up any help?

i may do some more work tomorrow so the sooner the info comes to be the better :)

Quote:

---

The relay is responding to the signals (i can hear it click) but the actuator will only turn one way. it cant be the relay signal since its responding and it cant be the actuator since the current must flow through both wires to complete the circuit.

---

There's one relay for extend and one for retract.
So.....
The relayS ARE responding to the signals (i can THEM click) but the actuator will only turn one way.
Your hearing both relays click?
Then one relay contact maybe burnt...thus preventing a circuit.
it cant be the relay signal since its responding and it cant be the actuator since the current must flow through both wires to complete the circuit.One relay is not working

then im unsure of how to fix the issue

So ONE relay clicking or TWO?

both a clicking yet only one is actually moving the actuator

Have you got a test meter?

http://www.fightingrobots.co.uk/foru...php?id=912&t=1

Does this diagram make sense?

The blob represents a contact that moves across when the relay is energised.

yep, i understand it and thats probably tomorrow job :)

Any clue which one is not working?..then with a bit of brute force you should be able to remove the cover of the suspect relay and have a look inside.