Printable View
hi
i have 2 14v drill motor(and gear box)
what batterys should i use? (a.k.a how many volts and mah (not to much money(and i have a good charger for most battery types)
and where should i get the batterys?
and what is a good place to get stuff for a lowish psi pneumatic flipper???
theo
Lead acid are good if you have more money NiMh are better you can also use LiPo's.You'll want a 14v and around 3000mah battery, technobots sell lead acid and car dealers sell them to.If you want NiMh the robo market place do design-a-pack or go to overlander batteries as they are good.
i think i will use the batterys i have now for my 45mph :!: :!: rc car :proud:....
intill i have some more money :lame:
there only 8.4v but 4500mah which is good
i think i am going to get a co2 tank from...
http://www.amazon.co.uk/approved-20oz-C ... 149&sr=1-5
and most of the other stuff apart from a valve (reg, a valve to let psi out, and stuff like that from...
http://www.technobotsonline.com/
and a 5/2 valve from ebay
but where can i get a double acting cylinder :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!: :!:
THEO
jonno can get the co2 tanks most people use then you know its correct etc
i dont know alot about flippers etc but you can get the rams from ebay
Ok but if it is more I am going to go with amazon (or I will nick a fire exthingy :lol:
what is his username :!: ( porbs seen him before but bad with names)
whats jonno username?
and whats the best type of welder tig, mig or what??? (lots of weird names)
theo
His username is roamingrobots.
Might be best to email though - email can be found on http://roamingrobots.co.uk/?pages=contact
thanks :roll:
and what is the best thing to weld aluminum tig, mig or what (weird names)
Theo
hate to say it but if you don't know the difference between tig and mig then I wouldn't start trying to weld aluminium. Get a simple arc welder for around 50 quid and start on steel. Much easier to pick up the basics of welding.