Team Shock's new robots

We have finally got round to starting our new robot- Whirlwind.

I have had most of the parts since January but other things have got in the way of building it.

The basic layout which I am going for can be seen here http://s881.photobucket.com/albums/ac13 ... d%20build/

So here are the stats,

Weight: hopefully less than 13.6kg
Weapon: Full Pressure flipper with a 60mm bore 80mm stroke ram, 1/2 valve and 2 buffer tanks.
Armour: 5mm HDPE on a steel frame with 10mm HDPE base.
Drive: Either 2x MFA motors or 2x Drills
Speedo: Scorpion XL
Batteries: 24v Ni-Mh
Radio: DX6 with BR6000.

We are hoping to get it done by Reading and I'll get some more pics uploaded as work continues.

That's a very nice looking setup Will, simple and neat. Makes me want to build a flipper now :proud:
Good luck with the build

Not a lot has happened with Whirlwind recently, we got the last part the other day so it is all ready to build. I have designed the frame and it should have been started on today but the weather had other ideas and stopped us from welding it. If the weather allows we might have it going for maidstone but it will be tight.

In other news I have started work on a new antweight. I decided to go for a spinner and so far it's coming along quite nicely

Name: Tempest
Weight: Should be under 150g with some weight saving
Length: 9cm
Width: 11cm
Height: 3cm
Weapon: 40gram Spinning Drum running off a brushless outrunner motor
Drive: 2x 30:1 Solarbotics motors
ESC: Peter's option A board
Rx: AR500e
Battery: 250mAh 2 cell LiPo
Armour: HDPE of various thicknesses

Pics- http://s881.photobucket.com/albums/ac13 ... 3_1239.jpg

Video- http://www.youtube.com/watch?v=qYWrN-svJX4

i do beleive you have the same laptop as me :P , looking very very nice btw .

Bloody hell, it's cute and scary at the same time!

It's looking great.

We have finally finished Whirlwind (just in time for Barnsley)

We managed to test the flipper last week but that caused a couple of problems (the main one being that it bent the 3mm thick steel arm) Since then we have added extra braces and it no longer bends and should hopefully work (or self destruct)

Here are the stats of the finished robot

Weight: Around 13.6kg
Length: 45cm
Width: 50cm
Height: 20cm
Weapon: Full Pressure Flipper with a 60mm Bore, 80mm Stroke 'Kenny Special' ram
Drive: 2x drills with 100mm Blue wheels
Armour: 3mm HDPE & 3mm Steel
Speedo: Sabretooth 10A
Batteries: 14.4 Ni-Mh for drive, 24v for valve
Radio: Spektrum DX5e with BR6000


Pictures can be found here

http://s881.photobucket.com/albums/ac13 ... G_0324.jpg

That looks good :) is it using the chassis of Aftershock or just built similarly?

Thanks Joey.

It is a completely separate robot to aftershock, we just made it in a similar way.

looks cool, has a stealthy look about it

I'd get those exposed wheels protected somehow, but it looks nice.