Selling up!!!! 4wd featherweight and assorted parts

For sale we have:

a 4wd invertible featherweight robot featuring:

4x 18v (was to be run at 24V) drill motors attached to argos gearboxes, running full metal internals (1 of the motors sparks for some reason, if you can fix it great, if not i can send you the link to the shop on ebay where i get the drills from. The woman who runs it gives you a discount if you don't need the batteries!)

1x Spektrum DX6I with AR6210 dual-part receiver (in original packaging and with all documentation)

4x Electronize FR30HX ESCs

2x double motor mounts machined by Kenny so the motors sit perfectly level

2x Metal spikes with bolts and washers (just need sharpening up and cleaning). Made by Kenny again. Used them as decoration and to stop the bot sitting on its side. Made from some steel that Kenny said is popular with heavyweights

4x robochallenge 75mm wheels

the chassis is 20mm HDPE, with 12mm HDPE internal bracing. The lids are 5mm ali

1x dimension engineering ParkBEC

2x RC mixers

6x 12v argos motors (two have gearboxes)

1x 24v 4300mah pack vapertech (I think one of the cells has gone so if you can replace it, great. the cells are easily sourced from ebay)

a load of 24v UV 5mm LEDs that have never been used

1x 125A inline fuse

Would like to sell as a job lot but i know the chances of that happening are remote so make offers on what you'd like and we will go from there! It doesn't include the battery i was using or the charger as I'm keeping them for future use.

Im looking for around £400 for the whole lot. Postage, we'll sort out later!

Thanks

Dan

Dont sell up before you have even started, why bit finish it, run it and see how you feel after?

it has been used before, but I'm tired of it now so it has to go!

Oh yeah, and a sh!t load of HDPE panels (think I've got 5mm, 12mm and 20mm)

ho wmuch for a panel of 5mm hdpe

how much would you like?

and the 20mm?

i only have a small amount of 20mm. How much would you need?

um i need about 1m by 800 mm sheet of 5mm ?

Quote:

---

Originally Posted by the16henry16

um i need about 1m by 800 mm sheet of 5mm ?

---

Haven't got that much, got 50cm by 50cm