no they are going to be 5 inch Battlekit wheels,
Can I use chain drive on those?
Printable View
no they are going to be 5 inch Battlekit wheels,
Can I use chain drive on those?
5= 127mm, close enough for me.
On 12V that setup will go about 20km/h Sounds a good speed and instant acceleration (wheelies garantied)
And I dont see any reason why chain cant be used. But for a 2wd I keep with the MSR gearboxes.
And if 4WD (or more) is needed, timing belt or poly V belts will do nicely for me.
How many 12V NiCad battlepacks should I use ?
Hannibalito I uses 1 12V 3600mAh pack, and can do more than 1 fight on that.
Hannibalito III uses a 4cell A123 battery.And thats only 2300mAh.
would 2 12V 3.3ah Nimh battlepacks be enough?
I would think one will be enough, In DB5 I use 1 2200 Nimh pack and it will last 30 minutes doing demos, usually 2-3 fights without being recharged.
1 pack will do fine indeed.
The stall current on speed 900s are 54A
WHAT SORT OF CONTROLLER CAN TAKE THAT?!?!?
By the way, which events are spinners allowed to run at ?
Generally, any speed controller rated in excess of 54 amps should be able to take it...