Oh thought yours was a flipper.
No no no - not putting Pussycat in with soemthing that may scratch it :) LOL.
Mr Stu
Printable View
Oh thought yours was a flipper.
No no no - not putting Pussycat in with soemthing that may scratch it :) LOL.
Mr Stu
got a pic of rebel as its standed after malvern
loads of things arnt in the pic but its a peek at whats there
cheers for temp host stu
http://www.featherweights.org/featherweights/rebel_feather.jpghttp://www.featherweights.org/feathe...el_feather.jpg
robot: gnar kill
speed: 13mph
power: 12v 3Ah NIMH
drive: 9.6v drills at 12v on 150mm 20mm thick lexan wheels.
controller: IBC
Weapon: 400mm spinning hammer. 5000rpm brobo saw coming soon.
armour: 6mm lexan.
status: was called screwed, was rebuilt using its parts and is a further refinement.
Robot - Flipper
Speed - 9mph
Power - For Drive: 9.6volt 3000mah NiMH or 14.4v 1900mah Ni-cds
For Compresser: 9.6v 1000mah Ni-cd or 12v 1000mah Ni-cd
For Solenoid: 24v 2300mah Slas (far too many batts on board)
Drive - 9.6v Drills Driving 150mm Diameter wheels
Weapon - Compressor driven flipper
Armour - Hardboard and Plywood atm but moving to lexan.
Other - Not intenede for combat in current state only for demo.
Robot - Turbine 3
speed - about 4mph
power - 2.8 slas (24v)
drive - wiper motors
controller - 15amp electronise cpus
wepon - 10bar flipper
armour - 3mm,4mm, 6mm ali + 1mm polycarb
Status - im tryin to make the darn thing reliable!:) but its still working
regards
Dave moulds
Team Turbine
Robot - G-force (currently)
speed - Damned if I know
power - 24V Slas
drive - wiper motors
controller - 15amp electronise cpus
weapon - lifter
armour - 4mm polycarb, 2mm Ali
Status - Being put together for some practice until I get the bits for Ami 4 or get Ami 3 back from Gloucester.
Robot- Micro-Maul II
Speed- Calculated at 20mph
Power- 14.4v ni-mh (drive) and 24v ni-cad (weapon)
Drive- Secret drill motors
Controller- H5 speed controllers
Weapon- 1400rpm vertical disc, designed for high torque flipping of opponents. Geared 6:1 off weapon motor.
Chassis- 4-6mm polycarbonate
Armour- 8mm polycarbonate and 2mm titanium
Features- 25cm disc at front and can run both ways up (youll have to wait to see how it does this)
Status- In the build, its first event will be 2004 featherweight smash (6th march).
Name:KENNY
Weight:12kgs
Power:2x 12v 2.3ah slas
Drive: 2x 24v gold motors running on 8/1 reduction
Speedos: 2x 15a cpu electronize
Weapon:ramming robot
Status: being built / ready for fw smash 2004 prob
-------------------------------------------------
regards
kenny
teamkenny
Name- Mini-Maul III
Weight- 10kg
Power- 1 x 3300mah ni-mh pack
Drive- 2 x 12v motors at 14.4v through 1:6 ratio
Speed- 20mph
Controller- H5
Weapon- 5cm spikes and wedge
Status- Moving about very fast and hitting stuff, If all goes well then this will enter the fw smash aswell as Micro-Maul.
Name- Mini-Maul III
Weight- 12kg
Power- 1 x 24v ni-cad
Drive- 2 x overvolted windsceen wiper motors
Speed- not yet built but calculated at 6mph
Controller- H5
Weapon- 1.5kg axe powered by a 1400rpm gear-motor at 24v axe hits at 60mph
Status- being built, parts from mini-maul III, above, go into Micro-Maul II
Notes- Terrorhurtz featherweight lookalike, to be made completely out of polycarbonate...