Printable View
Mass Disctruction Ultimate 3.1 (8) vs GeForce
I dont think Ill be winning this time around, but its worth a try. Ill try and get some fast attacks in by slipping the blade under and tossing MDU away if I can. Otherwise just keep ramming and flipping and see what happens.
Fantastic battles once again, Richard!
quote:
I dont think Ill be winning this time around, but its worth a try. Ill try and get some fast attacks in by slipping the blade under and tossing MDU away if I can. Otherwise just keep ramming and flipping and see what happens.
Anything can happen, Andy. Even MDU isnt invincible. :wink: (nothing against Aaron :proud:)
Team Gore - revolutionizing the vapourbot world
MDU is old and resides as my coffee table right now. The change to the translational spinner was to get it back into the league of the 100kg limit and to be more effecient then the previous versions while gaining extra advantages of 360 straife/dodging. MDU 3.1 was kinda a back step in the Kjs, but an upstep in control and stability over the previous versions of MDU.
I had fun terrorising the vapourbot world with MDU and Im sure other people will agree, it certainly raised the bar for walkers and FBS designs.
But these days, Im more happy to just stick with things that are simple as spending over 35hrs designing a bot gives you no more of an advantage as over a bot designed in 30mins, as the writers get lost in the technical terms.
Oh, and for fighting GeForce, Ill be staying in lock down mode of 500rpm to combat his quick attacks. If he tries to ram me, Im going to straife sideways out of the road and attack him from behind/side (Nothing Suss!)
the problem with raising the bar for standards so much is now no one else can reach it, tengu is one of the most successful machines of all time, possessign approximatly a third of all titles ive recieved (meaning about 30 titles) but in capability it doesnt have anythign on mdu other than the innovation fo the spinner ring. The thign is we dont have the technical knowledge or the patince to get it for osmetihng which is essentially a hobby.
Also, MDU is the robot we can blame for the introduction of the 150 kg walking limit.
Actually, you can blame the people who bitched about walkers having 200kg and the writers for coinsiding with them. MDU never told anyone to go to 150kg for walkers
It didnt tell anyone, maybe because it doesnt have a brain to think on its own, or a mouth to say to people go to 150kg for walkers.
Sorry about the delay!
Mass Disctruction Ultimate 3.1 certainly caused some pain in Round 1, but can it carry on against GeForce in Round 2?
3, 2, 1 - ACTIVATE!
As Mass Disctruction Ultimate 3.1 began to spin, GeForce came out quickly, but MDU 3.1 strafed to one side! Finding itself at GeForces side, it moved to strike, but GeForce spun round and MDU 3.1 hit the wedge before GeForce could use its flipper, sending the wedge robot spinning into the wall! Shuddering away from the blow, MDU 3.1 came back, spinning again, and again had to dodge GeForces advance, this time managing to glance the rear, spinning GeForce and allowing MDU 3.1 to attack again! But as it did, GeForce just managed to slip its blade under and flip! The flipper was bashed, but still sent the former champ flying away, coming down hard and bouncing into the east wall, coming to a stop! GeForce acclerated towards the stunned 8th seed, only for it to strafe again, get spinning and whack it right in the left side! Coming back in, MDU 3.1 took GeForce along the right side, denting the 8mm armour! The two robots charged at each other again, and GeForce swerved as MDU 3.1 strafed, to get under and flip again, while having its flipper dented!
Landing and getting back up to speed, MDU 3.1 moved back toward GeForce, who was coming for it! It strafed early to avoid any attacks from GeForce, then backed up into its opponents left side, before rushing in again to hit the side again as GeForce turned! On its next attack, MDU 3.1 was forced to strafe to avoid being flipped, then came back and just managed to glance the right side, although that took it into the wall, with a bang! GeForce spun away, and both robots came rushing to meet it each other! GeForce managed to catch MDU 3.1 again and flip it as it was spun off, almost hitting the arena disc! Its flipper was now a bit battered, but still going! There was another charge of the two robots, GeForce running past MDU 3.1 as it strafed, to get a nice bang in the backside! It was spun against the wall, so MDU 3.1 could mash its right side! As GeForce recovered and came in again, MDU 3.1 managed to do another dodge and hit the right side again!
A moment later, GeForce was hit again on the right by the 8th seed, the armour there now ripped! Still going, it went for MDU 3.1 and just got in a flip as MDU 3.1 hit it again, tipping the 8th seed onto its side and making it do a bouncing roll along the floor! With this blow, GeForces flipper seemed to give up, and as it retracted, it did so slowly! MDU 3.1 attacked again - GeForce managed to catch it on the wedge, but the damaged flipper came up too slowly to overturn MDU 3.1, and it bounced away! Both robots came together again, MDU 3.1 landing another punch on the right side, sending forces shuddering into the insides and leaving GeForce slowed on the right side! The unseeded robot struggled to attack MDU 3.1 again, but was just hit on the split side again, and was now left motionless! Mass Disctruction Ultimate 3.1 did a spin for the audience in the arena centre, as the body of GeForce waited for the countdown to end!
CEASE!
MASS DISCTRUCTION ULTIMATE 3.1 GOES THROUGH TO THE HEAT FINAL!
Hypertension Mk2 and No Close Shave 2 will now fight for the second place in the Heat M Final!
3, 2, 1 - ACTIVATE!
Hypertension Mk2 had the faster start, using its superior speed to spin round and ram No Close Shave 2 in the side, then chuck it away with its flipper! Landing on its side, NCS2 began using its wings to selfright, but not fast enough to avoid Hypertension Mk2 ramming its underbelly and flipping it again! NCS2 now landed on its back, balancing on the claw for a moment before coming down, allowing a third attack from the 24th seed! This flip caused NCS2 to go bang against the wall and bounce off, onto Hypertension Mk2s back and off, landing on its side again! Relentless, Hypertension Mk2 reversed to ram NCS2 into the east wall as it was selfrighting, but this pushed NCS2 off the seeded robot and back onto its wheels! It turned round to attack, but Hypertension Mk2 moved and the two robots turned around each other. Quickly, Hypertension Mk2 got under No Close Shave 2 again, turning it into the wall - a flip made NCS2 go straight up, landing on its wheels on Hypertension Mk2s body, and starting to roll off, but becoming stranded on the side! Turning around so NCS2 ended up on its flipper, Hypertension Mk2 tossed it into the north wall, leaving NCS2 on its side against the wall! Before it could selfright, Hypertension Mk2 had rammed it again, then pushed it round into the pit release, then around again to flip it into the pit! No Close Shave 2 hit the wall, bounced on the edge, teetered, then fell in!
CEASE!
HYPERTENSION MK2 GOES THROUGH TO THE HEAT FINAL!
Heat M Final:
Mass Disctruction Ultimate 3.1 (8) vs Hypertension Mk2 (24)
How come my vapourbots never make it to the Heat Final? :sad:
OK. Im hoping that the Hardox will stand up to a few hits, which should make the rest of the job that little bit easier. If I slide underneath the frame before it spins up to full speed, I can launch it and hopefully break the body through sheer force. If they dont break after falling down, then they should at least have had the weapon slow down, so Ill slide underneath and pit him.
People may be surprised, but Im actually feeling pretty confident.