Featherweight Database

Finally made a page about my neat new HTI gearboxes :)

http://www.micro-maul.co.uk/gearmod.htmlhttp://www.micro-maul.co.uk/gearmod.html

I now have the ability of running at up to 24v with less risk of burning out the motor

Having seen HellBringerX run 4 x HTI motors with SS2 gearboxes @ 24v, Id say you have the same chance of blowing the motors up as a Mini EV :proud: HellBringerX smoked on average 2 motors per event, IIRC.

I have seen quite a few reports on the american forums of the HTIs burning out at 24v in various configurations/set-ups but im sure you will have much better luck at 18v.

Chris - ^_^

sorry, what did you do here?
swapped some cheapo drill motors for slightly more expenseive cheapo drill motors?

no offense meant, just a lot of writing about a simple thing.

I have been running 2 wheel drive 600 size 6volt motors at 24 volts for 6 months now, no big deal really, pushed pillow torque in a couple of fights... and ran well on plastic gears for 3 events.

I personally would use better motors on the gearbox you have, but thaTS JUST ME.

Actually I thought Ewans effort was something to be commended rather than taken to bits. Clearly a lot of thought went into produce an information page with no use other than trying to show others how they can work on their machines (which is pretty self-less if you ask me).

Yes you might choose a different motor - but doesnt the fact that someone Ewans age can do the job of modifying the gearbox, and have the nouse to document it and write about it deserve support rather than a flaming ?

Seriously Ewan, dont let them get you down !

Ed
http://www.teamstorm.comhttp://www.teamstorm.com

fair point, although i think the actual mod was simple, and a bit pointless documenting it, I must say that Ewan has done something I find extremely difficult.

Putting this information on the net is not a thing i find easy, so yes, all commendation to Ewan on that, and to the fact he is selfless in his attempts to help everyone for no reward other than the enjoyment of helping. Fair play.

Doesnt change the fact that I worry about people Ewans age (and sometimes a little older) posting indepth information that I often feel is misleading, inaccurate and to be honest, does more harm than good, but in this case, yes, very well done article, not all acurate, but still... changing motors is not rocket science. I would be far more interested in why Ewan chose this motor? What benefits are there? What are its specs? It says basically, but more info would be nice, since so much time and effort was put in. Also, more info on the gearbox, what can it do at its limit?

People who visit this forum for information benefit a lot from people like Ewan, who put so much stuff up for them, but I have to say that there are times when I cringe at the stuff being said. I wonder how many people copy bad advice and give up when it doesnt work? Very few people realize how old some of our experts are, which I feel is dangerous.

This is nothing personal against Ewan, or anyone else, heck, Im sure people would disagree with some of the advice I give, but I always try to be sure that I am giving the best advice, not the latest thing i tried and dont know if it works yet. I have come accross a lot of people who have said that half the stuff you read about building robots is bad advice... I agree

Ewan has achieved something else I cant, Ed jumped to his defence very quickly, so he clearly knows how to make friends and influence people :) A future world leader maybe? :)

and having said that.....
Ewan DID put info links about both motor and gearbox....

slinks away under a rock, with egg on face....

you do that

Just a suggestion... maybe the FRA should put together a set of guides like these to help beginner roboteers? I beleive the Aussies are doing something like this at the moment.

It looks like Ewans guide was written just in time are the SS2 gearbox and the HTI motor is no longer availible on The RMP or RDS , Great Going Ewan !