Printable View
Yeah, my homemade bolts in the past have been pretty close to each other without any partitions, and could easily be shorted out if I wasn't paying attention properly when working in the bot with the batteries plugged in. Considering I've got a lipo pack now, these (combined with a lid) will go a long way to making sure I don't set myself/robot on fire. Good to know they can cope with the amps easily enough.
A lid for the board or lipo?
Lid for the board. Just to stop anything touching across the +ve and -ve connectors and shorting out the battery. Some of the ones on eBay come with a lid, but they also come from Hong Kong, so for the time it takes, it's easier just to make a little lid.
3 or 6mm hdpe?
3mm should be more than enough enough. I'm just planning to use some 1mm polycarb that I have kicking about, should bend nicely round the edges.
Sounds like a plan
http://i881.photobucket.com/albums/a...k/39080640.jpg
what size bottle is that your using as a bufer will? 3.5oz? 4oz? where did you order it from?
Quote:
Originally Posted by mr_turbulence
It came from me, I reckon I have more some where but it will mean digging in the roof, I will let you know
Flipper now works- pleased with the power so far- had quite a big gas leak so I need to fix that and finish off a couple more bits but it is pretty much complete.
http://youtu.be/aglBRqwAaMk
that flipper looks good when self righting.is that at 16 bar