Cicatrix Build Diary

I have read of Botbitz not running well on 6S batteries, 5S being fine

Would be more than 6S, 24v NiMH

The botbitz 85a handles 6s fine. Am currently running that set up at the mo

Sweet, cheers Dan :)

Also, before I buy and risk making a mess of it, can you confirm that this is the adapter i'd use to attach Banebots wheels to a GR02?

http://www.technobotsonline.com/banebot ... -bore.html

3mm bore.

Oops, clicked in the wrong one. Although it turns out the one I was going to click on is 2mm and not 12 as I believe it is suppose to be? Can't see them on there?

Closest thing I can see on the Technobots website is this:

http://www.technobotsonline.com/banebot ... -bore.html

In new money, the 1/2 bore is 12.7mm. The shaft of a GR02 is 12mm so that may be a bit too small; the adapter could rock a little, resulting in loosening grub screws and wheels falling off. Then again, it could be okay, could be worth buying them to try, although at £8.65 each it's not the cheapest might-not-work experiment.

Is there a better way to attach wheels than that closer to the bearing? How is it generally done?

http://www.fightingrobots.co.uk/foru...p?f=111&t=5549

any use? this is the method i am planning to use for Massacre.