Team Hydra Sale

Got the specs on the supernova chargers wrong!!

Full specs are:

Fast Charge / Discharge 1 to 25 Cell NiCad / Ni-MH , 2 to 12V Lead Acid Batteries
Auto Discharge / Charge
0.1A to 5.0A Self Limiting Charge Current
0.1A to 3.0A Self Limiting Discharge Current
10 Programmable User Definable Memories
2 Line LCD, 16 characters per line
Full Status Check functionality including-
Average Voltage
Discharge cut-off voltage
Input voltage
Output voltage
Peak voltage
Discharge start voltage
In process Charge / Discharge current adjustment
Delta Peak Detection / Zero Current Voltage Check
Trickle charge functionality
Audible Function Alarm with mute facility
Integral Cooling Fan
10~15V Input Voltage 12v Pb Battery or 10~15v Power Supply
Reverse Polarity Protection on both Input and Output
Overload Protection
Short Circuit Protection / Electronic Shut Off

I also have:

Seven 120mah 1/3 AAA Graupner batteries. Five with standard receiver plug, one with small jst connector and one with both connected in line - £3 each

Two Spektrum 6100e receivers (the ones with the pins at the end, not the 90 degree ones). Both have been used. Checked them tonight and they bind and work just fine. - £25 each

I have a couple of big sheets of ti on ebay at the moment.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MESELX:IT
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MESELX:IT

Got a couple of windscreen wiper motors if anyone wants them. Just postage costs or can drop at an event

http://www.teamhydra.co.uk/wp-conten...21-150x150.jpg

http://www.teamhydra.co.uk/wp-conten...20-150x150.jpg

Got a bit of 10bar pneumatic pipe.

Coil sizes are:

3m 6mm pipe (natural colour)
5m 6mm pipe (green)
3m 10mm pipe (green)
2m 10mm pipe (natural colour)
10m 8mm pipe (natural colour)
3m 12mm pipe (green)

http://www.teamhydra.co.uk/wp-conten...48-150x150.jpg

Set of mobility scooter wheels, 250mm diameter x 75mm wide, 3/4 axle with 5mm key way. All ok but i seem to have lost one of the bolts from them.

http://www.teamhydra.co.uk/wp-conten...22-150x150.jpg

Four 250mm x 100mm cast aluminium wheels. Drilled out to suit go kart hubs

http://www.teamhydra.co.uk/wp-conten...24-150x150.jpg

low pressure buffer tank made from a 1kg halon bottle. Has a 3/8 outlet.

http://www.teamhydra.co.uk/wp-conten...29-150x150.jpg

Two low pressure rams. One 32mm diameter, 50mm stroke, one 40mm diameter, 100mm stroke

http://www.teamhydra.co.uk/wp-conten...30-150x150.jpg

On/off valve for paintball bottle. Fits directly onto the standard pin valve.

http://www.teamhydra.co.uk/wp-conten...35-150x150.jpg

if i win the titanium sheet could i collect it from you at burgess hill?

how much for the wheels? aluminum and the others

How much for the Rams, on/off valve & the buffer tank?