Martyn’s 2nd World Championship qualifiers (sign up)
Here it is, the all new, al shiny, Back to Rock II!!!
Name - Back to Rock II
Shape - A box with a slightly sloped front
Weight - 100 Kilogram
Speed - 29 km/h (18mph)
Dimensions - 90x75x30 cm
Ground Clearance - 0 at sides and front, 2 mm at the back
Power - 2x Etek motors at 48 volt
Movement - Four wheels, 20cm diameter
Turning Circel - Zero
Weaponry - It has a broad hydraulic lifting arm which can easily lift 200 kg. To easily get underneath an opponent, it has two lifting plates at the bottom of the arm, one on the left end and one on the right end, instead of one large lifting plate like Behemoth.
Between the two plates, in the centre of the scoop, I mounted a vertical diamond edged Pussycat-style blade, powered by a S28-150 Magmotor, spinning upwards at approximately 3000 RPM, which will hopefully rip off some armour, or more likely, a tire, while lifting an opponent. Jamming a blade into an opponent while lifting it hopefully provides as much control over an opponent than a Behemoth-style grabbing claw/axe can, and it€™ll surely do more damage. (To avoid confusion, the blade is actually part of the lifter, so when the lifter moves up, the blade moves along).
On both sides of the bots is a pair of 5 mm titanium skirts, to make sure I won€™t get flipped very often, as hydraulic srimechs just aren€™t as fast as pnuematic ones.
Armour - 6 mm titanium all around
Srimech - The lifter self-rights the robot when needed
Strenghts - Nice weapon synergy, high traction, low ground clearance
Weakness - Hydraulic srimech might prove to be slow
A picture can be found here: http://jupiter.walagata.com/w/madbull/BacktoRockII.gifhttp://jupiter.walagata.com/w/madbull/BacktoRockII.gif
(Message edited by MajinB on August 28, 2005)
Martyn’s 2nd World Championship qualifiers (sign up)
If drillzilla can do it how come us british cant
DrillZilla was technically a shufflebot not a walker. After DrillZilla competed in the World Championships the rules were changed so that shufflebots got no extra weight advantage. Here in FanFic we decided that was slightly unfair and raised the limit, most tournaments now give shufflers a 150kgs limit. So if you are using shuffling plates instead of walking legs then you are likely to be overweight at 184kgs.
Hope that makes some sort of sense as to why you cant.
Martyn: Is it possible for two of my robots to represent the same country or can I only have one for that country?
(Message edited by andrewj on August 28, 2005)
Martyn’s 2nd World Championship qualifiers (sign up)
Dont count on him getting it, Andy. Hes hopeless.
Martyn’s 2nd World Championship qualifiers (sign up)
GigaByte 1.5 - England
http://teamcode14.proboards24.com/index.cgi?board=Stats&action=display&thread=111305 1920http://teamcode14.proboards24.com/in...play&thread=11 13051920
GeForce 3.0 - The Netherlands
http://teamcode14.proboards24.com/index.cgi?board=Stats&action=display&thread=110374 4327http://teamcode14.proboards24.com/in...play&thread=11 03744327
FP4.0 - Australia
http://teamcode14.proboards24.com/index.cgi?board=Stats&action=display&thread=110374 4077http://teamcode14.proboards24.com/in...play&thread=11 03744077
Martyn’s 2nd World Championship qualifiers (sign up)
Robots and countries so far
France
Killotine Evo
Italy
Clawdius Decimus Murderous
Scotland
All Scoop And No Stab Make Steve A Dull Boy
The Channel Islands
Seggy 4
Canada
Chalkie 3G
Japan
Tengu
Ecuador
Dante
Netherlands
Axe to fall
Cosmic thunder 2
Belgium
Back to rock
Wales
SYNDOS
Manic Monsoon
Gibraltar
Snake Bite IV
EIRE
Cyclone force 2.5
Mexico
Axe-o-lotl
USA
Cacodemon
Portugal
Pure Evil: Revenge of the Disc
England
Giga Byte 1.5
Australia
Force Power 4
Wales and The Netherlands are full there for Aj Geforce needs to change country
Martyn’s 2nd World Championship qualifiers (sign up)
Name - Axe to Fall
Shape - Take a cylinder, cut it in halve, and then put it on the ground, rectangular side heading downwards. The straight ends are the left and right sides, and are sloped. (Well, just take a look at the picture =P )
Weight - 100 Kilogram
Speed - 24 km/h (15 mph)
Dimensions - 115x80x40 cm (due to axe hanging out, main body is 80x80x40 cm)
Ground Clearance - 0 at front, 7 mm anywhere else
Power - 2x LEM130s at 48v
Movement - Four inner wheels, 10cm diameter
Turning Circle - Zero
Weaponry - The main weapon is a 5 kg double-headed axe on top of the machine, it€™s a steel 80 cm shaft with two diamond edged blades made of hardox on the end of it. The blades are shaped like the Mortis€™ blades, in order to create some nice slices into opposing armour.
The whole axe is powered by 2 nitrogen bottles at 1000 psi, a 1 kg buffer bottle and a 30 mm bore ram, for fast and furious hits, with a downforce of almost 2 ton brought onto a fine blade, and an energy unleash which seems significantly higher than for example Beta€™s if my calculations are right.
At the front of Axe to Fall is a small wedge/ram made out of 8 mm Titanium, to lift my opponent€™s wheels into air while clobbering them with my blade, or perhaps even to grab him. This ram is also my plan B if my axe fails in battle, just ram them hard using my good traction.
Armour - 8 mm Titanium front and 15 mm polycarb for the rest of the bot.
There are also two small blocks of vulcanized rubber on the mid-front and the mid-back of my machine, to absorb the downforce where the axe hits the chassis.
Srimech - The axe acts as a srimech, thanks to the curved shape of the top my bot can self right in no time, even if it has to self right over the wedged front (the wedge is very small mind you).
To make sure my bot won€™t end up on his side, I created a pair of curves on both sides, as can be seen on the picture.
Strengths - Destructive weapon, quick at self righting
Weakness - Weapon only works when opponent is in front of or behind the machine.
http://jupiter.walagata.com/w/madbull/Axe2.gifhttp://jupiter.walagata.com/w/madbull/Axe2.gif
Martyn’s 2nd World Championship qualifiers (sign up)
Representing the USA [Duh]
Jack Kennedy
Representing Japan:
Cyberdemon
Stats here: http://farr.proboards21.com/index.cgi?board=Hitmenhttp://farr.proboards21.com/index.cgi?board=Hitmen
Martyn’s 2nd World Championship qualifiers (sign up)
Representing Poland: Going Crunch
Representing Spain: Love Bite V2.0
Martyn’s 2nd World Championship qualifiers (sign up)
Name - Wolf
Shape - A box with a sloped front and rear with side skirts. It is invertible also.
Weight - 100 Kilogram
Speed - 35 km/h
Dimensions - 95x80x25 cm
Ground Clearance - 0 at sides and front, 2 mm at the back
Power - 4x Etek motors at 48 volt
Movement - Six wheels, 25cm diameter
Turning Circle - Zero
Weaponry - It has a electric lifting arm which can lift 150 kg (Biohazard style). To easily get underneath an opponent, it has a plate on the bottom of the arm.
On both sides of the bots is a pair of 7 mm titanium skirts, The skirts are low anyway.
Armour - 7 mm titanium all around the body.
Srimech - The lifter self-rights the robot when needed. But it can run inverted. Preferably self-right first.
Colour - navy blue with gold stripes. With a Canada flag on the top.
Strenghts - Useful weapon, good low ground clearance, and great traction on the floor.
Weakness - Ego. Not as effective when inverted.
Martyn’s 2nd World Championship qualifiers (sign up)
Power - 4x Etek motors at 48 volt
Weight - 100 Kilogram
I think someones dreaming... :proud:
And can GeForce represent Jersey please? :P