Printable View
quote:
the bar is 2000 millmeters. 8x8x8 is length times width times height. The bar have 8 teeth on the both sides of the bar. The bar is power by a linear actutaor.
You say the length is 8... 8 is no 2000 if the bar is 2000 long, the dimensions would be 2000*8*8
Ill make 2000 X 8 x 8 then.
please show us the bot as it is now, I have the feeling it would be approved as it is now
2000mm is too long, youd spin the vapourbot instead of the bar.
Time for another bot of my creation, that my incredibly pessimistic self is convinced will be incredibly bad.
The name comes from a game Ive been playing way too much lately.
Name: Sithis
Shape: Circle
Colour: Pure Black
Weight: 100kgs
Dimensions: L:90cm W:90cm, H:30cm
Speed: 15mph
Turning Circle: 0cm
Armour: 8mm Titanium
Ground Clearance: 7mm
Movement: 4 wheels with Vulkanon treads, two on the bottom and two on the top, powered by 2 S28-150 Magmotors running of 2NiCad battlepacks at 24 volts.
Weapons: Full body spinner powered by an etek running at 36volts, which can deal out around 80kjs of power
Scrimech: Invertible.
Let me have a crack at it. :proud:
Shape: Circle
One thing wrong with that shape: its not 3D. :proud: What you mean to say is cylinder, I assume.
Movement: 4 wheels with Vulkanon treads, two on the bottom and two on the top, powered by 2 S28-150 Magmotors running of 2NiCad battlepacks at 24 volts.
I dont think that would work out well. Go for 4 invertible wheels instead of your current set-up , and also go for two LEM130s for motors, and run them at 36 volts, as this will give you a good boost of power. Also, what batteries would you use with those motors?
Weapons: Full body spinner powered by an etek running at 36volts, which can deal out around 80kjs of power
Its not a full-body spinner if its invertible. :proud: The current terminology is ring spinner. Also, youre going to have a hell of a bad time running an Etek at 36 volts. Go for 48v. Also, what teeth is it using? How much does the entire weapon weigh?
Armour: 8mm Titanium
What are you stating this for, the top and bottom, the ring, or everything?
Other than that its quite good. :proud:
Name: Sithis
Shape: Cylinder
Colour: Pure Black
Weight: 100kgs
Dimensions: L:90cm W:90cm, H:30cm
Speed: 15mph
Turning Circle: 0cm
Armour: 8mm Titanium all around.
Ground Clearance: 7mm
Movement: 4 invertable wheels with Vulkanon treads, powered by a couple of LEM130s at 36V with 3NiCad battlepacks
Weapons: Ring spinner powered by an etek running at 48volts, which can deal out around 80kjs of power. Two five kilo hardox teeth, curved to rip armour. The whole ring is about 20kg.
Scrimech: Invertible.
Looks a bit better?
Yes :)
Needs battery stats...
Why would 2 wheels at the bottom and 2 in the air not work? I cant think of a single reason.