Featherweight Database

:proud:

BonX 2

Name: BonX 2
Weight: 12kg
Weapon: 50*65 mm FP CO2 flipper
Drive: 2 100 mm Bickles with SPEED 600
Battery: 3000 mAh 14,4v NiMh
Speedcontroller: Electronizes
etc.

FlowRate
Speed: 14Kph
Power: 1x 14v 3000mAh soldered NiMH Pack (thanks for the advise ed I can really see the difference)
Drive: 2x 9.6v Drill Motors
Controller: 2 x 30amp Electronize (wish i could afford the ibc)
Weapon: High flow rate low pressure 10bar Pneumatic Flipper
Armour: 6&10mm Polycarbonate
Frequency: 40.685MHz
Status: Dismantled due for a rebuild for next summer

WTF are you doing Ian?

Mr Stu

Mistake Big Mistake.

I coppied the info from Flowrates bio on the first page and forgot to change the name to flipper .

Really sorry stu. Ed can you clean this up please by replacing Flowrate with Flipper please. Thanks.

Regards
Ian

Tiamat
Full Pressure Flipper 35 bore 80 stroke ram.
18v drill motors run at 24v.
4mm polypro armour not fitted yet.
Pic on profile.
Regards
Tony.

ooooo that looks good, reminds me of pressure

Cobra (rev 4 i think)

Speed: 12Kph
Power: 2x 2.3ah SLAs in parallel
Drive: 2x 9.6v Drill Motors at 12v with custom polyurethane wheels
Controller: IBC
Weapon: twin armed thwack hammer with 6mm steel scoop on the end (500g)
Armour: 6mm steel and 10mm polycarbonate on the top and bottom.
Frequency: 29.885MHz with a silvertone (http://www.silvertone.com.auwww.silvertone.com.au) military reciever
Status: ready to roll. currently the state champion.

heres some piccies:
http://www.robowars.org/forum/album_personal.php?user_id=14http://www.robowars.org/forum/album_...php?user_id=14

Loisteputki

simple rammer with really thick armor and reliable drivetrain. (made from parts of LW robot [pic on profile] in one week, going also to patricipate as a LW with another FW)

weight: 11.8kg
battery: 12v/4Ah yuasa SLA
drive: 2x900rpm/18v drills with custom alu gearboxes to 110mm wheels
controller: servos&micro switches :sad:
weapon: one steel spike
armor: 4mm thick stainless (yup, in FW :P) and baseplate is 4mm 6061 aluminium

Dont worry, youre not the only one with servo operated micro-switches for control. Im in that league as well, lol :)

Jamie