have all three :P
Printable View
have all three :P
You would probably be ok. Wheelchair motors pull only a few amps when running normally. We have to over rate everything for combat because everything is pushed to it's limit.
I could go for overvolted Bosch 400's or 750's but then I would need a big speed controller
and a custom transmission. Why bother over volting? Get some wheel chair motors, run them at their rated voltage and attach some bigger wheels. Job done
I guess that's a possible idea but I doubt I would achieve the speed I want unless a go for something like a 2:1 increase
yes you would. An electric wheelchair has wheels of say 200mm. Up that to 600mm and suddenly you got a whole lot more speed from them
very true, and electrocize (or how ever you spell them) 30a esc's would do it ok at 24v?
or could i even get away with 15a with 25a fuses?
electronize. They should be ok as long as you don't do anything stupid like try and sit on the thing. If you were really concerned you could do the external relay modification to them and run them with 40A car relays.
if we are talking 40a car relays, then i have found that my 15a run fine with 25a fuses so in theory i could run a electronize 30a on 40a fuses?
Your 15A electronize should be fine.