BAC

Uh...Satanix is Dave's feather, Kody, fail :P

Eye Of Ran AW stats:

Eye Of Ran
WEIGHT: 150g ish (I can throw together a weight calc if you like)
DIMENSIONS: 100 x 80 x 18 mm
SHAPE: A cuboid wider than it is long with a wedge at the back, extending from this cuboid is a long bar, at the end of which is the weapon motor (pic available if this is too difficult to understand, this seems to happen a lot with my designs)
COLOUR: Mostly fantasy artwork, generally blue and green with some gold. The blade is mostly unpainted with viridian tips.
DRIVE: 2 Sanyo 50:1 micro motors driven by a Sabertooth 2x5a controller, driving 2 rear semi-protected rubber tyred wheels, run at 11.1v off a 3 cell lithium polymer pack
SPEED: Medium fast
GROUND CLEARANCE: Blade is about 1-2mm off the ground, all around the rest is quite high except the rear wedge which is 0
ARMOUR: Top plate is a single piece of 3mm polycarb, reinforced with struts of balsa wood to counter the forces of the weapon. The rear wedge is 1mm polycarb covered in spring steel to make it low to the ground, and everything else is either held in with screws or taped to the underside of the top.
WEAPONS: A 65 x 15 x 4 mm undercutting titanium blade, which weighs 30g and is driven by a brushless outrunner motor rated at 20000rpm, with the ends curved into hooks to catch and rip the opposition. The blade protects the front of the robot and the vast majority of the sides as well, and packs a punch of...well, it doesn't particuarly matter in antweights :P It is kept from hitting the ground by a tiny piece of polypropylene in the bottom of the motor.
SRIMECH: Invertible, the odd shape and weapon should prvent it resting on its sides (it doesn't really have any sides anyway)
NOTES: Uses Spektrum radio to prevent it jittering or going out of control.
STRENGTHS: Weaponry, good drive and pushing power
WEAKNESSES: Newtonian physics

Bugger off, Picus man. My head ain't working today. :P

Now what was it...ah yeah, Stewie, that was the one I was thinking of, not Satanix. Sorry about that.

valliant (my real one :proud: ) http://www.antweight.co.uk/results/ws28 ... CF5374.jpg

defiant: (the 1 with the wight lid...not the spinner :sad: ) http://www.antweight.co.uk/results/ws28 ... CF5386.jpg

good luck ben!!!

Hey Ben!

1) MicroForce 3.0
2) Baby Hell

Hope that is okay.

Round 1: :mrgreen:
Battle 1: Stewie VS ValliANT VS Eye of Ran AW
Battle 2: Microforce 3.0 VS Razzler VS CombatANT
Battle 3: Legion VS Flamberge VS Bobcat
Battle 4: DefiANT VS Baby Hell VS Anty B

1 robot is eliminated from each match :roll:

Stewie VS ValliANT VS Eye of Ran AW

Push ValliANT into EoR. If Joey wants a team-up, fine, but either way that's what I'm gonna do. :proud:

Microforce 3.0 VS Razzler VS CombatANT

Bye Razzler.

Legion VS Flamberge VS Bobcat

Destroy everything!

DefiANT VS Baby Hell VS Anty B

Baby Hell to go to hell, I guess. :P

Battle 1: Stewie VS ValliANT VS Eye of Ran AW: Stewie out.
Battle 2: Microforce 3.0 VS Razzler VS CombatANT: Razzler out.
Battle 3: Legion VS Flamberge VS Bobcat: Legion out.
Battle 4: DefiANT VS Baby Hell VS Anty B: Anty B through. Can't tell who'll be out.

Stewie VS ValliANT VS Eye of Ran AW

Uh...destroy things, to quote a certain Mr. Kunz. :)

Legion VS Flamberge VS Bobcat

Get straight around the back of Flamberge, clamp onto it, and then use it as a weapon to shred both halves of Legion. :P

Best of luck everyone, this has the potential to be pretty good.

valliant: hehe i love fighting flippers and spinners...no i really do! valliant works well upside down and he has 4mm polycarbonate is basically spinner proof! so yeah i will go for eor aw cos it will rebound off my polycarb and if i can get him befor he spins up he can be shunted out easily!

defiant: lol work with anty b and push baby hell out :proud:

jack

this still on?