Printable View
What did I say, Frank? :proud:
Thanks for that, Scott! Now, thanks to the w00ty Random.org sequence generator, the line-ups are below.
Round 1
Ge5orce vs. Exa-Gore-Ic Evo
Exodus vs. Triple Whamlet
Glasgow Kiss vs. Damocles
Flipping Hell vs. Taki III
Requiem R-evolution vs. Ancalagon the Black
Back to Rock III vs. Asterix Anarchius
Stiltskin vs. Renegade
Mobile Failure vs. Triple Big Mac
So...gimme them awesome tactics and predictions, pleez. :proud:
Mobile Failure vs. Triple Big Mac
Hit it. Hit it more! And try to make Triple Big Mac run over some hazards!
....And try not to get Failure killed in the process! :proud:
STILTSKIN vs. Renegade
Flip it around a lot, possibly out of the arena if the opportunity to do so arises.
Also, avoid the front.
It may be possible to combine these two ideas into a single tactic, such as Flip it out of the arena from the sides or rear while avoiding the front or some similar phrasing, but you are free to draw your own conclusions on this matter provided theyre not stupid ones.
Exodus vs. Triple Whamlet
Exodus will appear as follows:
Front wedge angled at 30*
Rounded rear
Track Coverings with barbs
Weapon Setup 1
Top/Base= Blue
Front/Rear= green
Sides= Black
Skirts= Purple
Tactics are to try and stay away from the front and attempt to get under the side/rear clearance. From there Ill try to throw it out of the arena or into the pit.
TACTICS
*cries* Why me?!?!?! Ill aim to get the beater and the lifting arms around the back of the robot, and hopefully dump it into the pit. Nothing else I can do, really!! :sad:
I dunno the stats of the HR I have to fight. Little help here...
Here you go Dave
http://strickenone.proboards99.com/index.cgi?board=housies&action=display&thread=9http://strickenone.proboards99.com/i...display&thread =9
Much appreciated Mr Elliot :)
Tactics: keep to the side, wedge underneath and launch it sky high, and try and get there before that blade spins up!
«Ge5orce vs. Exa-Gore-Ic Evo»
My speed advantage should help me here. I should be able to get to the sides or rear, where there is a 7mm clearance to exploit. Being as it is so huge I should easily find a place to get the flipper under. Then its a case of throwing it around, which shouldnt be a problem even if it is 400kgs. It also cant push wedges well which should help.
My tactics are for Back to Rock to exploit that big GC of Asterix and lift and pit it. When under it his belly has to face my saw where I can eather cut into the weak polycarb OR into the tires, both options look nice. Furthermore he has some control issues so I will take advantage of that.