You should try a pair of VESCs instead of the TZs, then you could limit the current and avoid anything blowing up! (plus you also get proper low end control) http://www.enertionboards.com/electr...or-controller/
Printable View
You should try a pair of VESCs instead of the TZs, then you could limit the current and avoid anything blowing up! (plus you also get proper low end control) http://www.enertionboards.com/electr...or-controller/
I never used the tz85 with simonk, the times it burned was with the botbitz firmware due a faulty motor.
Today started welding the frame, it is made out of 3,2mm hardox and it's nose is made out of 6mm hardox.
http://gallery.svitterzon.nl/thumb.p...tio=OAR&save=1
http://gallery.svitterzon.nl/cache/a...2011.26.20.jpg
Great shape, really cool stuff
That's gorgeous!
Nice build
Man, you should leave that thing unpainted. It looks gorgeous!
A sweetass paintjob wil do far more for it than the bare Hardox.
I'm seeing something along the lines of a black body with deep purple edges and white pinstripes...
today made a first test drive. But there is a problem the shock absorber's where the gearbox is attached to are to soft.
When the wheels need power the gearbox is pushed backwards and the belt slips. I have to make a ring that will hold the gearbox in place but still make it possible to flex.
http://gallery.svitterzon.nl/thumb.p...tio=OAR&save=1
stef
How are you keeping internal components from rubbing against the cans of the drive motors?
On the above picture the wiring is a big mess, i will do some nice cable management to prevent cables hitting the motors.
today made two bushes that will hold the drive axle in place and made a test drive. It works perfect and the motors are still able to move a little.
http://gallery.svitterzon.nl/thumb.p...tio=OAR&save=1
https://www.youtube.com/watch?v=IwJN0guaFHM
stef