My first beetle weight, just some questions

Link to each part, then we can all make sure that you're not going to make any mistakes etc. Don't forget to include postage and customs etc

£150-170 is probably a more accurate figure.

http://www.ebay.co.uk/itm/2-x-12V-DC...item4d02562621

http://www.botbitz.com/index.php?rou...&product_id=56

http://hobbyking.com/hobbyking/store...arehouse_.html

http://www.directplasticsonline.co.u.../Natural/10mm/

http://www.technobotsonline.com/bane...-shore-30.html
have the hubs

ignoring the rx and tx, have i missed anything?

Battery charger? Also if I was you I'd get a high power servo from hobbyking in case you want to add a lifter as the postage will probably be more than the cost of the servo if you order it separately- but that's your choice.
If you don't already have them you need a connector for your battery and a removable link/ switch or something (I'm not sure on the beetleweight rules for this).
Other than that it looks like you've got everything.

ok how many mha should i aim for?

and what thread are the mounting bolts on the front of those motors?

also it doesn't say on the botbitz website if they have a BEC for the Rx?

will these do for the battery and the charger?

http://www.giantshark.co.uk/product/...c-lipo-battery

http://www.giantshark.co.uk/product/...harging-system

thanks in advance!

BEC for the Rx? YES they have

thanks a lot for all the help guys now i need to go and get some cash :p

What is the best way of mounting those motors? I was thinking a hope mounting hole and some kind of clamp or just making a plate to mount he front of the motor to, will that be strong enough?

http://www.youtube.com/watch?v=c_j0W1cAKOA
Is how I made mine

i just used a bit of 2mm aluminium u channel to mount my 4 motors but you can buy ready made brackets off ebay and amazon

http://www.amazon.co.uk/Pololu-Metal...eywords=Pololu

http://www.ebay.co.uk/itm/2-pcs-Stee...item417753aa06

http://www.ebay.co.uk/itm/25mm-Motor...item33781e0245

I think I'm going to make one out if the 10mm hdpe sheet I have orders, to mount things to the top and bottom, can I thread it or will it be too soft, or are there wallplug type things I can get I can get?